 | Home > Tdi > Am I missing something? |
 
|
|
|
| Vesuvius Member Since: 06 Aug 2016 Location: Northumberland Posts: 17  
|
First of all hello... already spotted some old friends from Kielder 4x4 and disco3 posting here...
Formalities out of the way... I'm hoping to answer a quick question if I may impose on everyone's weekend... Just got myself an old '94 300Tdi 130 that has been rebuilt just a few hundred miles ago... I've been underneath it for the first time trying to resolve a jumpy speedo. I noticed a suspicious looking bell housing - is it missing 4 bolts? If so anyone got a part number that might work for me?  Click image to enlarge Thanks, J |
||
6th Aug 2016 5:21pm |
|
| Vesuvius Member Since: 06 Aug 2016 Location: Northumberland Posts: 17
|
Try this one - not sure the last picture was immediately clear.
Click image to enlarge |
||
|
6th Aug 2016 5:25pm |
|
| Mash Member Since: 09 Feb 2015 Location: Guernsey Posts: 1674  
|
Yes you are, hope this helps:
Click image to enlarge Click image to enlarge 90 wolf - Jasmin http://www.defender2.net/forum/topic39408.html 90 V8 - Maggie http://www.defender2.net/forum/topic42564.html 110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html 52HG25 lightweight https://www.defender2.net/forum/topic72342.html D3 Hse - Fiona Capri 2l S - Anna Think I might have a problem............ |
||
|
6th Aug 2016 5:51pm |
|
| Vesuvius Member Since: 06 Aug 2016 Location: Northumberland Posts: 17
|
Cheers Mash!
Are they LR part numbers? I'll have to get that sorted before it goes anywhere I guess! |
||
|
6th Aug 2016 6:38pm |
|
| dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 |
Click image to enlarge also missing gear box wading plug to green arrow LR part number |
||
|
6th Aug 2016 7:07pm |
|
| ickle Member Since: 22 Jul 2010 Location: South Vendee Posts: 1729  
|
IIRC when a Disco engine is mated to a Defender transmission, there are some bolts in the wrong place / not drilled and tapped ?
|
||
|
6th Aug 2016 7:53pm |
|
| Vesuvius Member Since: 06 Aug 2016 Location: Northumberland Posts: 17
|
Is that what I have here? A disco engine and a defender box?
I don't know the full history of the vehicle but I think it is all defender. |
||
|
6th Aug 2016 8:03pm |
|
| ickle Member Since: 22 Jul 2010 Location: South Vendee Posts: 1729
|
do you have drilled / threaded holes into the engine where the bolts are missing??
|
||
|
6th Aug 2016 8:07pm |
|
| Vesuvius Member Since: 06 Aug 2016 Location: Northumberland Posts: 17
|
I've not looked in such detail...
I'll get back under it later. It all looks factory as the casting opposite each hole is shaped to be tapped. Will have a look and report back! |
||
|
6th Aug 2016 8:51pm |
|
| Vesuvius Member Since: 06 Aug 2016 Location: Northumberland Posts: 17
|
Here is the other side.
Each of those ribs in the casting is opposite a bolt hole. Click image to enlarge |
||
|
6th Aug 2016 8:58pm |
|
| Vesuvius Member Since: 06 Aug 2016 Location: Northumberland Posts: 17
|
Wrong image!
Try this Click image to enlarge |
||
|
6th Aug 2016 9:08pm |
|
| dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 |
m10 x 35 bolt flange head
|
||
|
6th Aug 2016 9:37pm |
|
| Vesuvius Member Since: 06 Aug 2016 Location: Northumberland Posts: 17
|
CheersDS - that is perfect.
What is missing from the other two holes that are aligned centre? The look like they should be plugged with something? |
||
|
6th Aug 2016 9:48pm |
|
| dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 |
link to part numbers 300tdi engine and other defender part numbers
http://www.allbrit.de/UNI.cfm?PAGE=749047&SPRACHE=EN |
||
|
7th Aug 2016 6:53am |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
