↓ Advertise on Defender2 ↓

Home > My Defender > Introduction of my 110
Post Reply  Down to end
Page 3 of 10 <12345678910>
Print this entire topic · 
John Fair



Member Since: 10 May 2016
Location: Norfolk
Posts: 150

United Kingdom 2013 Defender 110 Puma 2.2 USW Santorini Black
Isn't that normal then? Thought that was normal! Embarassed
Post #536689 1st Jun 2016 9:58pm
View user's profile Send private message View poster's gallery Reply with quote
YOLO110



Member Since: 14 Feb 2015
Location: Perth Oz and Stansted UK
Posts: 1633

Australia 
Riverboy wrote:


OK thanks John. If I'm ever brave enough I'll have a bash. Very Happy I suspect taking them off may be easier than putting them on, level!


That's easy too...

A level line of masking tape across the bonnet at the desired height of the letters does the trick.

Then measure and mark the centre of the bonnet on the tape.

On goes the first letter with its middle on that centre mark and it's base just touching the top of the masking tape

Then work sideways with about a 2cm gap between the letters...

Tape off, clean off any residue,

the a cold one! Thumbs Up YOLO... You Only Live Once...
Post #536708 1st Jun 2016 10:37pm
View user's profile Send private message View poster's gallery Reply with quote
John Fair



Member Since: 10 May 2016
Location: Norfolk
Posts: 150

United Kingdom 2013 Defender 110 Puma 2.2 USW Santorini Black

Click image to enlarge

Front bumper change. Went for a 15% on the window tint but it's hard to photo.
Post #539325 11th Jun 2016 8:47am
View user's profile Send private message View poster's gallery Reply with quote
familymad



Member Since: 13 Dec 2011
Location: Bucks
Posts: 3463

 2016 Defender 130 Puma 2.2 HCPU Santorini Black
Lovely look. First non Adventure with that front end I have seen and it looks great. If you don't mind, how much are they charging for it all? I think this will be the next 'must do' mod for most..... 1951 80" S1 2.0
1995 110 300TDI
1995 90 300TDI
Post #539389 11th Jun 2016 3:02pm
View user's profile Send private message View poster's gallery Reply with quote
familymad



Member Since: 13 Dec 2011
Location: Bucks
Posts: 3463

 2016 Defender 130 Puma 2.2 HCPU Santorini Black
Wheels look great too 1951 80" S1 2.0
1995 110 300TDI
1995 90 300TDI
Post #539390 11th Jun 2016 3:02pm
View user's profile Send private message View poster's gallery Reply with quote
JOW240725



Member Since: 04 May 2015
Location: Suffolk
Posts: 7873

United Kingdom 2012 Defender 110 Puma 2.2 XS CSW Orkney Grey
That looks stunning! I'm not normally a fan of the Bowler bumper but with the Adventure grille and Bowler steering guard it looks great. The wheels are perfect, best colour! Thumbs Up James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers
Post #539399 11th Jun 2016 4:09pm
View user's profile Send private message View poster's gallery Reply with quote
John Fair



Member Since: 10 May 2016
Location: Norfolk
Posts: 150

United Kingdom 2013 Defender 110 Puma 2.2 USW Santorini Black
I know what you mean about the bowler bumper I did a bit of soul searching but I was convinced (although slightly nervous) that the horizontal slats would be a good match after I parked next to one at Bowler. In for a penny and all that and I'm happy with the front look. Ref cost Embarassed well it's all genuine Landrover main dealer with receipts. I'm sure the prices are well documented with a bit of discount and bowler equipment is priced on their web. If you want pounds shillings and pence pm me and I shall dig out the paperwork. I'm still considering adventure led headlights but lr really couldn't do anything with the price at @£750 each Rolling with laughter Oem,Nolden?,are @£500 a pair I believe. Still not convinced it needs them. Although we cannot afford street lighting locally. The standards do leave a black hole in front of the car on main but perhaps a wiring rejig to include dip with main plus wire upgrade would eliminate the empty void in my life ? Anyone done this that lives out of town?

Last edited by John Fair on 11th Jun 2016 7:32pm. Edited 1 time in total
Post #539444 11th Jun 2016 7:24pm
View user's profile Send private message View poster's gallery Reply with quote
John Fair



Member Since: 10 May 2016
Location: Norfolk
Posts: 150

United Kingdom 2013 Defender 110 Puma 2.2 USW Santorini Black
Shocked Shocked Shocked Shocked oooooooohhhhhhhhh hang on. The next must do mod for most Big Cry Big Cry Big Cry no no no no it's really expensive. Many millions £ and no one ever comments on it. Don't do it.
Ta. Whistle
Post #539445 11th Jun 2016 7:28pm
View user's profile Send private message View poster's gallery Reply with quote
John Fair



Member Since: 10 May 2016
Location: Norfolk
Posts: 150

United Kingdom 2013 Defender 110 Puma 2.2 USW Santorini Black
Short road trip. A Defenders not just for Chrismas.

Click image to enlarge



Click image to enlarge



Click image to enlarge

Ps I've noticed lots of people ask about range. I can tell you as fact that at 130kph on the gps 90mph on the speedo a 2.2 110 will do 347miles. The last 20, yes only 20, will be with the fuel light on. The final 5.7miles of the 20 will be in fuel "safe" ecm induced surge mode at 60mph. Rolling with laughter it never did cut completely Bow down
Post #548604 13th Jul 2016 11:28pm
View user's profile Send private message View poster's gallery Reply with quote
John Fair



Member Since: 10 May 2016
Location: Norfolk
Posts: 150

United Kingdom 2013 Defender 110 Puma 2.2 USW Santorini Black
Today's fiddle.

Click image to enlarge



Click image to enlarge
Post #552608 31st Jul 2016 4:05pm
View user's profile Send private message View poster's gallery Reply with quote
John Fair



Member Since: 10 May 2016
Location: Norfolk
Posts: 150

United Kingdom 2013 Defender 110 Puma 2.2 USW Santorini Black
Ooh and a slickshift from Syncro Gearboxes. Nothing to see though. 😎
Post #552610 31st Jul 2016 4:10pm
View user's profile Send private message View poster's gallery Reply with quote
JOW240725



Member Since: 04 May 2015
Location: Suffolk
Posts: 7873

United Kingdom 2012 Defender 110 Puma 2.2 XS CSW Orkney Grey
Looks stunning still. How's the slickshift? Saw it released last week and have added it to my ever extending list, is it worth having?

Never did ask the Bowler tune... 170HP with intercooler? James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers
Post #552662 31st Jul 2016 7:36pm
View user's profile Send private message View poster's gallery Reply with quote
John Fair



Member Since: 10 May 2016
Location: Norfolk
Posts: 150

United Kingdom 2013 Defender 110 Puma 2.2 USW Santorini Black
Hi. Find myself an honest talker....love it or hate it!!!! The remap is great.well worth the upgrade. Will cruise at 130kph quite comfortably in Europe but the fuel consumption was poor at this speed. Little over 20mpg. 170 I suspect is wishful thinking but yes that's the one and yes I would recommend no problem.👍. Allisport inter cooler fitted later by myself direct from Allisport. I was concerned about egt due to the dpf raised temps and an expected euro trip with altitude and summer temps. I have to confess a vested interest here as I have previous racing history with Allisport never giving anything but excellent service. Again I would recommend no problem. 👍
Slick shift is also a vast improvement on standard throw but I notice the gate from 3-4 to 5-6 is slow/ tight. It's ok from 1-2 to 3-4 Also reverse is a little more effort. I'm hoping it will slacken in use. Fitting instructions non existent but reasonably straightforward if your into spanner work. The reason for fitting is my other half finds reverse in particular, along with general gear throw, irritates a bad shoulder joint so that's not a great step forward at the moment. Watch this space.......
Post #552688 31st Jul 2016 8:50pm
View user's profile Send private message View poster's gallery Reply with quote
John Fair



Member Since: 10 May 2016
Location: Norfolk
Posts: 150

United Kingdom 2013 Defender 110 Puma 2.2 USW Santorini Black
I should saw JOW I notice your only in Suffolk. If you ever want to try before committing feel free to have a short drive up and have a go. ( it's a nice holiday type village)👌🏻 I'm currently on the slow process of looking at brakes and suspension work.
Post #552690 31st Jul 2016 9:02pm
View user's profile Send private message View poster's gallery Reply with quote
JOW240725



Member Since: 04 May 2015
Location: Suffolk
Posts: 7873

United Kingdom 2012 Defender 110 Puma 2.2 XS CSW Orkney Grey
Hi John, thanks that's interesting to hear, please keep us updated on how the slickshift beds in.

Thanks very much for the offer but I'm not sure I'd dare drive yours, I'm already rather envious without actually driving it! If you know any nice green lanes up your way though it would be good to go out for a drive? We're often up on the North Norfolk coast with the kids. Thumbs Up

I can't add anything from experience on the brakes and suspension, but lots on here Def2. From my reading I'd be going down the AP Racing brake route and Alive have just brought out their suspension for the 110. Obviously you have Bowler and Twisted options, but I'm sure I'm not telling you anything you don't' already know. Bow down James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers
Post #552709 31st Jul 2016 9:37pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 3 of 10 <12345678910>
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums