DEFENDER2.NET - View topic - Loose pipe

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Loose pipe - is it a problem

Page 1 of 1

Print this entire topic ·

BykerPete

Member Since: 02 Feb 2015
Location: Midlands
Posts: 159

2014 Defender 110 300 Tdi CSW Willow Green

Loose pipe - is it a problem

Morning all.

Just having a poke around on my 2.2 Tdci and noticed that the plastic pipe marked on the image in my gallery is loose and can be wiggled and turned quite easily. It's the one with the red arrow pointing at it just forward of the ECU. The jubilee clip is tight but the plastic bit above it is loose where it goes into the larger black plastic cylinder. There doesn't seem to be any obvious way to tighten it either

Sorry for the lack of technical knowledge but some of this stuff is currently beyond me

Anyone have any ideas or is it safe to ignore?

Thanks,

Pete.

25th May 2015 11:36am

munch90

Member Since: 26 Oct 2013
Location: guildford
Posts: 3558

its just a clip on engine breather pipe , normally this type are quite loose fitting , really as long as it doesn't pull off easy , if you pinch each side it will come off

doubt that jubblie clip is standard would have thought it would have had spring/clipped style of clamp like the one back further on the pipe

Last edited by munch90 on 25th May 2015 11:50am. Edited 1 time in total

25th May 2015 11:47am

BykerPete

Member Since: 02 Feb 2015
Location: Midlands
Posts: 159

Brilliant. Thanks for the rapid reply - this really is the best forum out there

Pete.

25th May 2015 11:49am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum