DEFENDER2.NET - View topic - DC to DC battery chargers

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > DC to DC battery chargers

Page 1 of 1

Print this entire topic ·

strang

Member Since: 16 May 2012
Location: Happy Valley
Posts: 1399

2009 Defender 90 Puma 2.4 XS CSW Galway Green

DC to DC battery chargers

I am looking at this http://www.ringautomotive.co.uk/uk/product...-/RSCDC30# as an alternative to fitting a split charging system, as I want to be able to swap it between vehicles. Has anyone got any experience of such devices at all? Euro-Leafing to infinity and beyond.....

23rd Apr 2015 9:11pm

munch90

Member Since: 26 Oct 2013
Location: guildford
Posts: 3558

How many vehicles do you want to swap between ?

23rd Apr 2015 9:15pm

strang

Member Since: 16 May 2012
Location: Happy Valley
Posts: 1399

Just two - and yes, I guess two separate split charge systems will cost the same or less! - but I would be swapping a leisure battery between vehicles too.

However, one vehicle would be my series one (which has an alternator) so I wasn't sure if a full split charge system would fit. Euro-Leafing to infinity and beyond.....

24th Apr 2015 3:53pm

munch90

Member Since: 26 Oct 2013
Location: guildford
Posts: 3558

think you mean series 1 has a dynamo and yes voltage from that could be a problem

the small split charge (think they 20amp) units from smartcom have a adjuster for voltage cut in , the smartcom is what they fit for caravan battery charging ( don't know if they are suitable or not for dynamo )

think I would go down the route of 2X split chargers ,2x small Anderson plugs , and battery in a box ( box should be vented to outside of vehicle )

or 1x split charger built in to leisure battery box then just plug into each vehicle via small Anderson plug for charging

whats leisure battery for ?

TROUBLE WITH CHARGING ANY BATTERY INSIDE THE VEHICLE THE BATTERY SHOULD BY IN A PROPER BATTERY BOX AND BE VENTED OUTSIDE

24th Apr 2015 4:13pm

strang

Member Since: 16 May 2012
Location: Happy Valley
Posts: 1399

Thanks for the info - my Series One does have an alternator as its fitted with a 200Tdi (not for the purists!) so volts aren't a problem.

The leisure battery is for powering an ARB fridge when parked up on a camp site (I go on long trips abroad with both my Defender and the series one).

I have previously asked about some kind of 'portable' split charging system, and that might well work with Anderson connectors. I never though of that. Sounds like a solution and a good idea - thanks (cheaper too)

How easy would it be to do if I bought a kit such as this - http://www.ebay.co.uk/itm/261610607268?_tr...EBIDX%3AIT Euro-Leafing to infinity and beyond.....

24th Apr 2015 4:23pm

munch90

Member Since: 26 Oct 2013
Location: guildford
Posts: 3558

ah ok if alternator then all should be ok

ive just fitted one of the durite split charger, all works ok

personally I would put split charger outside of the portable battery box , just in case ( you don't want any sparks in with a charging battery in case its gassing at all )

24th Apr 2015 4:43pm

strang

Member Since: 16 May 2012
Location: Happy Valley
Posts: 1399

Cheers for the info Euro-Leafing to infinity and beyond.....

26th Apr 2015 6:55pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum