![]() | Home > Puma (Tdci) > Puma 110 Rear Carpet Pieces |
![]() ![]() |
|
|
LRI-Solutions Member Since: 27 Feb 2014 Location: Rye Posts: 144 ![]() ![]() |
Do you have a TDCI? Is it this bit you are after?
![]() Click image to enlarge LRI Solutions Ltd ![]() www.lrisolutions.co.uk |
||
![]() |
|
yorkshireman Member Since: 28 Mar 2016 Location: North England Posts: 80 ![]() |
Yep that's the bit, need each side.
|
||
![]() |
|
LRI-Solutions Member Since: 27 Feb 2014 Location: Rye Posts: 144 ![]() ![]() |
PM sent LRI Solutions Ltd
![]() www.lrisolutions.co.uk |
||
![]() |
|
AndyS Member Since: 18 Aug 2012 Location: London Posts: 597 ![]() ![]() ![]() |
Do you get odds and sods of carpet? I need a bit about 95 cm x 25 cm (I'll measure it properly if you have a bit) to fill this bit...
![]() Click image to enlarge |
||
![]() |
|
excossack Member Since: 22 Feb 2012 Location: North West Posts: 5965 ![]() ![]() ![]() |
I got some black carpet from http://www.martrim.co.uk/catalogue/carpet-sheets.html at one of the shows 1999 Defender TD5 110
Regards John M0VAZ Econet Station 48 no clock |
||
![]() |
|
AndyS Member Since: 18 Aug 2012 Location: London Posts: 597 ![]() ![]() ![]() |
Thanks, excossack, that looks like it'll hit the spot exactly. I'll get some ordered.
![]() |
||
![]() |
|
yorkshireman Member Since: 28 Mar 2016 Location: North England Posts: 80 ![]() |
Thanks for your help Steve, great to deal with.
![]() |
||
![]() |
|
Scotm Member Since: 28 Feb 2014 Location: Aberdeenshire Posts: 685 ![]() ![]() ![]() |
AndyS - Don't suppose you could send me a link where to get a similar black matting to you have on top of your drawer?
|
||
![]() |
|
AndyS Member Since: 18 Aug 2012 Location: London Posts: 597 ![]() ![]() ![]() |
Yeah, sure...
http://www.ebay.co.uk/itm/331032963389 It's up for £28 at the moment (for a 6' x 4', 10mm thick bit of foam-type rubber) but I paid £22.40 so maybe they have sporadic discounts on it. There are many other options including a chequer plate design... ![]() I wanted to check it out with the cheapest I could find before paying out anything more than I had to. It's very easy to cut with a Stanley knife so easy to adjust if needed. |
||
![]() |
|
Scotm Member Since: 28 Feb 2014 Location: Aberdeenshire Posts: 685 ![]() ![]() ![]() |
Thanks - will give that a try.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
