DEFENDER2.NET - View topic - back diff as spare for front D-90 non ABS

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > back diff as spare for front D-90 non ABS

Page 1 of 1

Print this entire topic ·

pdv

Member Since: 07 Feb 2014
Location: Asse
Posts: 26

2008 Defender 90 Puma 2.4 CSW Bonatti Grey

back diff as spare for front D-90 non ABS

Recently I changed the back diff to an ashcroft locker and the standard diff just has 60 000 KM, so it's in good condition. My question is if it is possible to use the back diff as spare for the front in case I brake it ? or will i need extra parts in case off brake ?

grtz
Tarcis

31st May 2014 2:31pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6198

On a D90 the back and front are the same.

Keep it as a spare!

You may even have been lucky... was the back diff a 4 pinion HD one? this will give you a HD front axle then!

31st May 2014 5:29pm

pdv

Member Since: 07 Feb 2014
Location: Asse
Posts: 26

no it's 2pin i will look at it again to be sure. i know the 110 is 4pin of P38 and ABS models normally

but is it plug and play or does take more fit it in the front ?

31st May 2014 6:10pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6198

90 rear is straight fit into 90/110/130 front.

1st Jun 2014 5:40pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum