![]() | Home > Technical > TD5 Earth point. |
![]() ![]() |
|
|
Fatboy Slim Member Since: 04 Feb 2008 Location: Bridgend Posts: 1006 ![]() ![]() |
The cable that runs over the bell housing on a Td5 is usually the live cable to the solenoid on the starter James
|
||
![]() |
|
munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558 ![]() ![]() |
Normally the main earth from battery comes from battery to chassis then on to transfer box in one cable lenght
unless someone has added a extra earth , take it you have checked what terminal it goes to in the battery box ? |
||
![]() |
|
Welkman Member Since: 02 Nov 2014 Location: Essex colchester Posts: 333 ![]() ![]() |
Thanks guys but I have the starter fully connected. This is not a cable from the main loom but a massive black earth coming from the battery box. It doesn't fit the bellhousing bolts (ring too small) so I attached it to the chassis. The normal transfer box earths are present and the earth strap from the ECU to the chassis is also there. I am concerned that it must have been attached to one part of the engine as I obviously unbolted it. Its annoying because I photographed and labelled everything else and haven't had many other issues.
|
||
![]() |
|
Welkman Member Since: 02 Nov 2014 Location: Essex colchester Posts: 333 ![]() ![]() |
Ok im an idiot, battery live connected to earth point on chassis and earth connected to starter motor
![]() |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
