↓ Advertise on Defender2 ↓

Home > For Sale & Wanted > Wanted: Td5 defender PAS pipes
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
diesel_jim



Member Since: 13 Oct 2008
Location: hiding
Posts: 6031

United Kingdom 2006 Defender 110 Td5 SW Epsom Green
Wanted: Td5 defender PAS pipes
I'm after the two high pressure pipes to and from the pump (one goes to the steering box, the other to the reservoir) for a Td5 defender.


Anyone?


Oh, and a pair of defender sunvisors. Thumbs Up
Post #173596 6th Oct 2012 6:09pm
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 7681

2011 Defender 110 Puma 2.4 USW Stornoway Grey
i have some pipes (new) kicking about, do you know MPN i will cross check with what i have. Cheers

James
110 XS Utility
130 Puma Station wagon/camper (in the making)
90 Puma Hardtop
Post #173927 8th Oct 2012 6:51am
View user's profile Send private message View poster's gallery Reply with quote
diesel_jim



Member Since: 13 Oct 2008
Location: hiding
Posts: 6031

United Kingdom 2006 Defender 110 Td5 SW Epsom Green
Cheers James, I'll get the numbers. Thumbs Up
Post #173929 8th Oct 2012 7:13am
View user's profile Send private message View poster's gallery Reply with quote
diesel_jim



Member Since: 13 Oct 2008
Location: hiding
Posts: 6031

United Kingdom 2006 Defender 110 Td5 SW Epsom Green
Pipe, reservoir to pump: QEH102570

Pipe, pump to steering box: QEP105122



Bow down Bow down
Post #173938 8th Oct 2012 7:51am
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 7681

2011 Defender 110 Puma 2.4 USW Stornoway Grey
Will take a gander tomorrow and let you know Cheers

James
110 XS Utility
130 Puma Station wagon/camper (in the making)
90 Puma Hardtop
Post #174190 8th Oct 2012 8:57pm
View user's profile Send private message View poster's gallery Reply with quote
diesel_jim



Member Since: 13 Oct 2008
Location: hiding
Posts: 6031

United Kingdom 2006 Defender 110 Td5 SW Epsom Green
Much apprciated.
Post #174250 9th Oct 2012 7:45am
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 7681

2011 Defender 110 Puma 2.4 USW Stornoway Grey
not good, all the ones i have are not what you are after unless there is a cross ref to them. they are all tdi from res to pump and res to box. Sorry Cheers

James
110 XS Utility
130 Puma Station wagon/camper (in the making)
90 Puma Hardtop
Post #174263 9th Oct 2012 9:09am
View user's profile Send private message View poster's gallery Reply with quote
diesel_jim



Member Since: 13 Oct 2008
Location: hiding
Posts: 6031

United Kingdom 2006 Defender 110 Td5 SW Epsom Green
Ah well, no worries.
Post #174278 9th Oct 2012 10:48am
View user's profile Send private message View poster's gallery Reply with quote
diesel_jim



Member Since: 13 Oct 2008
Location: hiding
Posts: 6031

United Kingdom 2006 Defender 110 Td5 SW Epsom Green
Also after Td5 heater pipes
Still after these.


also after the rubber heater pipes that go from the engine to the heater, and to the header tank and fuel cooler for early Td5 defender


Anyone?
Post #175955 15th Oct 2012 3:33pm
View user's profile Send private message View poster's gallery Reply with quote
diesel_jim



Member Since: 13 Oct 2008
Location: hiding
Posts: 6031

United Kingdom 2006 Defender 110 Td5 SW Epsom Green
Just a knackered PAS pump needed now....
OK, so i've got the pipes sorted, but it turns out that I've got a disco PAS pump on the engine I've fitted, so I need either a knackered DEFENDER PAS pump, or this union from one (The bit with the red plastic plug in Wink ):


Click image to enlarge


It just unscrews from the pump (think it's 24 or 22mm OD)

This union is smaller on a discovery pump: The OD of the WRONG disco threaded end on the pipe is 15.7mm (across the top of the threads)

ID of the wrong union for the above is 14.4mm


The correct defender union on the pipe, OD is 19.9mm, so I'd assume (without stripping my 110 pump off) that the ID of the union would be something like 18.6mm


Anyone got an old pump they'd be willing to remove this union and sell/swap for a disco one???
Post #178678 24th Oct 2012 6:29pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums