DEFENDER2.NET - View topic - Were I can install the rear view CMOS camera?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Were I can install the rear view CMOS camera?

Page 1 of 1

Print this entire topic ·

Eduardo

Member Since: 28 Aug 2008
Location: Región Metropolitana
Posts: 2109

2007 Defender 110 Puma 2.4 SW Stornoway Grey

Were I can install the rear view CMOS camera?

Hi there!

Finally I bougth a rear view camera plus a monitor

And I would like to have some ideas were I can mount the camera and the monitor to have a good vision considering the spare wheel.

Some toughts?

Thanks Eduardo

MY 2007 110 SW PUMA 2.4: Big Fog of 64'
MY 1994 Jayco 1207 Folding camper: "El Tremendo"

Click image to enlarge

5th Jun 2012 4:12pm

Zagato
Site Supporter

Member Since: 08 Jan 2011
Location: Billingshurst West Sussex
Posts: 4990

Really depends on what you want to look at e.g. tow bar for hitching, maybe higher up to see over trailer loads and whats behind or just to see a general area to avoid obstacles when reversing. Giving the camera angles field of view may also determine the best spot for it

5th Jun 2012 6:32pm

Eduardo

Member Since: 28 Aug 2008
Location: Región Metropolitana
Posts: 2109

Thanks Zagato.

I forgot to put for what I need it

I like to have a general vision of the back (Childrens, other low objects that cannot be seen, etc)

I was thinking in the roof rack, but the view is somehow block by the spare wheel. Eduardo

MY 2007 110 SW PUMA 2.4: Big Fog of 64'
MY 1994 Jayco 1207 Folding camper: "El Tremendo"

Click image to enlarge

5th Jun 2012 8:10pm

Naks

Member Since: 27 Jan 2009
Location: Stellenbosch, ZA
Posts: 2605

2010 Defender 90 Puma 2.4 SW Alpine White

Stick it above the rear window washer nozzile

--
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged

Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ

5th Jun 2012 8:44pm

d j hutton

Member Since: 30 Jul 2009
Location: Dorset
Posts: 1044

2011 Defender 110 Puma 2.4 USW Orkney Grey

I think that one is designed to go on a USA style number plate, so would most likely fit in the number plate area, albeit a bit of an "offset" view , or how about just under the door, looks small enough to go there.

Dj 1989 200tdi 90 csw
2011 110 usw Orkney grey

Buy British 🇬🇧

Defender Clothing Designs available at http://www.rangesports.com/acatalog/Defender-Stuff.html

5th Jun 2012 10:50pm

Merlin

Member Since: 30 Oct 2010
Location: Newmarket
Posts: 980

Plug it all in and hold the camera in various postions while looking at the monitor. Perhaps stick it here and there with gaffer tape.

Merlin

6th Jun 2012 10:38am

quentin

Member Since: 23 Jul 2012
Location: on tour
Posts: 119

I mounted mine inside the hole in the rear crossmember, bonus is I can line the caravan up to hook onto the tow bar. eventho its offset the camera has a 120 degree view so can see everything all around anyway, including the bottom of the spare tyre on the back door which is a little annoying.

Click image to enlarge

28th Jul 2012 8:38am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum