DEFENDER2.NET - View topic - Stalling at idle

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Stalling at idle

Page 1 of 1

Print this entire topic ·

mmddbb

Member Since: 15 Sep 2021
Location: UK
Posts: 13

2008 Defender 110 Puma 2.4 XS CSW Stornoway Grey

Stalling at idle

I've got a 2008 110 2.4 TDCI. It hasn't really missed a beat since I bought it, and has been great, but have recently been putting more miles on it and it's started stalling at idle.

The problem seems to occur after about 1 - 1.5 hours of driving - its fine when setting off, and on the motorway and faster roads but at the end of those journeys when in traffic it doesn't seem to like to idle. The idle revs get a bit rough and then suddenly drop and it cuts out. It's fine if I keep the revs up but the stalling makes life a bit difficult in London where we're based!

Any suggestions on what I should check?

Many thanks

24th May 2023 5:00pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 16857

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

1. Check for stored DTCs using a diagnostic tool.
2. In the absence of DTCs, replace the VCV.

24th May 2023 5:37pm

mmddbb

Member Since: 15 Sep 2021
Location: UK
Posts: 13

Thanks for this. My Ultragauge isn’t giving any codes so I’ve ordered a Denso replacement VCV.

25th May 2023 1:16pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum