↓ Advertise on Defender2 ↓

Home > Td5 > 110 CSW - Bracket-hose brake & Clamp
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
doruk1981



Member Since: 15 Aug 2022
Location: Aargau
Posts: 96

Switzerland 2002 Defender 110 Td5 SW Coniston Green
110 CSW - Bracket-hose brake & Clamp
While my rear cross-member is out and everything is rather easily accessible in the rear part I'm also doing some maintenance on the toplink fullcrum&balljoint. While enjoying myself with the impossible screws there, i noted that the brake line is not sitting tight in the bracket and some clamp is missing. However from my other car, I know there is a sleve that goes over the bracket and the clamp tightens everything firmly together. I checked the LRW diagram and also the haynes manuals but cant find anything there. As is, I don't see how the clamp will make the breakline not raddle around when going through the bracket.
Does someone have a picture how this should be properly assembled?
I would like to get this over with in the next week as the everything should slowly be put together again...

Thanks
Doruk Td5 110 Station
Post #984812 8th Mar 2023 11:47am
View user's profile Send private message View poster's gallery Reply with quote
geobloke



Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4350

United Kingdom 
I think I know where you mean but a photo would help here. Do you mean the clamp on the chassis or on the axle?

ABS or non-ABS?

Happy to pop out and take photos under Miffy Thumbs Up
Post #984821 8th Mar 2023 12:49pm
View user's profile Send private message View poster's gallery Reply with quote
doruk1981



Member Since: 15 Aug 2022
Location: Aargau
Posts: 96

Switzerland 2002 Defender 110 Td5 SW Coniston Green
Yes the clamp on the chassis, the plastic parts on the axle also dusted off but they are identifiable on the diagrams ..

number 21 is mounted on the frame, then number 4 goes through the star shaped hole in 21. but I don't understand how item 20 should hold this thing together..


Click image to enlarge


Click image to enlarge
 Td5 110 Station
Post #984829 8th Mar 2023 1:09pm
View user's profile Send private message View poster's gallery Reply with quote
geobloke



Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4350

United Kingdom 
Ok yes I know where you are now.

So 4 gets pushed through 21 the there is a slot cut in to the end of 4 that 20 slots in to holding 4 in position.

Does that help or would you like a photo?
Post #984836 8th Mar 2023 1:55pm
View user's profile Send private message View poster's gallery Reply with quote
geobloke



Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4350

United Kingdom 
Although this is the front of a Disco the theory is the same.


Click image to enlarge
Post #984837 8th Mar 2023 2:02pm
View user's profile Send private message View poster's gallery Reply with quote
doruk1981



Member Since: 15 Aug 2022
Location: Aargau
Posts: 96

Switzerland 2002 Defender 110 Td5 SW Coniston Green
I understand now - thanks a lot for the explanation and the picture.
the means how that comes together is such a LR thing ... simple but also kind of questionable Smile Td5 110 Station
Post #984838 8th Mar 2023 2:07pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums