DEFENDER2.NET - View topic - Engine bay fuse box

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > Engine bay fuse box

Page 1 of 1

Print this entire topic ·

sxileander

Member Since: 13 Jul 2021
Location: Bucks/Northants Border
Posts: 11

Engine bay fuse box

I have the AMR2983 fuse box in my 300tdi and want to use the spare f4 for a feed to fog lights (I don’t have a HRW so f4 is spare). New wires and relays all run and working but I cannot remove the skinny wire from f4 to replace with a suitably sized wire.
Any idea how to remove the old HRW wire? The crimp looks like it should come out if a clip or pin is pushed in the right place but I have tried with no success and don’t want to force it and break it. Any ideas?

4th Sep 2021 2:50pm

LiftedDisco

Member Since: 17 Aug 2014
Location: Towcester
Posts: 349

Yep, there's a tang on the back of the connector which needs to be pressed whilst gently pulling on the appropriate cable to remove from the fusebox.

Where are you located... Bucks/Northants border can't be too far from me!

6th Sep 2021 10:33am

sxileander

Member Since: 13 Jul 2021
Location: Bucks/Northants Border
Posts: 11

Ok - I’ll have a *gentle* poke and play. Thanks.

Hanslope BTW.

6th Sep 2021 10:40am

LiftedDisco

Member Since: 17 Aug 2014
Location: Towcester
Posts: 349

Drop me a PM if you struggle as I have a tool for extracting them and I'll wander down later in the week if you need...

6th Sep 2021 11:50am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum