↓ Advertise on Defender2 ↓

Home > Expedition & Overland > Replacement Hannibal gutter clamps
Post Reply  Down to end
Page 2 of 3 <123>
Print this entire topic · 
doublea



Member Since: 12 Jul 2011
Location: Aberdeenshire
Posts: 494

Scotland 2016 Defender 110 Puma 2.2 Adventure Phoenix Orange
Rack bought.

It came with 8 clamps



Click image to enlarge



and two lengths of moulding to run in the gutter beneath the rails.



Click image to enlarge



Lower part of the step missing though... Current Steeds:
2015 110 UW in Grasmere Green
2003 BMW F650 the Hack
2000 Elise
1992 Ducati 888 (no longer in bits, yahoo)
1990 TDR 250 (in bits again)
1988 TDR 250 (no longer in bits) and for sale
Post #890051 9th Mar 2021 12:25am
View user's profile Send private message View poster's gallery Reply with quote
JOW240725



Member Since: 04 May 2015
Location: Suffolk
Posts: 7866

United Kingdom 2012 Defender 110 Puma 2.2 XS CSW Orkney Grey
Nice one!

Not seen that rubber strip before, very useful. I just used a neoprene strip on mine. James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers
Post #890063 9th Mar 2021 6:45am
View user's profile Send private message View poster's gallery Reply with quote
MattyEssex



Member Since: 23 Jul 2021
Location: Essex
Posts: 77

United Kingdom 2010 Defender 110 Puma 2.4 XS CSW Indus Silver
Just came across this thread as I am also looking for replacement clamps. Opportunity to buy a Hannibal Rack for my 110 but it is missing the clamps. Rubber present told it is new and never used but stored outside for few years so needs a clean up.

Other question I have is what is best to use as I would like to paint it Black, as aluminium can it be powder coated or I remember seeing at LR Show this year some black paint that leaves a slight texture, raptor or similar name I think. Any suggestions greatly received. Thanks
Post #931270 26th Nov 2021 3:03pm
View user's profile Send private message View poster's gallery Reply with quote
bodstruck



Member Since: 09 May 2020
Location: Wiltshire
Posts: 770

United Kingdom 
I had my 110 rack blasted and powdercoated. Cost me about £300.

I have had a few of these racks come and go through my hands and do now have some clamps spare. I also recall seeing some feet and clamps on FB or something recently. I'll have a look and post the link if I find it.



Click image to enlarge


After powdercoating.
Post #931286 26th Nov 2021 5:09pm
View user's profile Send private message View poster's gallery Reply with quote
bodstruck



Member Since: 09 May 2020
Location: Wiltshire
Posts: 770

United Kingdom 
Post #931287 26th Nov 2021 5:14pm
View user's profile Send private message View poster's gallery Reply with quote
MattyEssex



Member Since: 23 Jul 2021
Location: Essex
Posts: 77

United Kingdom 2010 Defender 110 Puma 2.4 XS CSW Indus Silver
Thanks for this, I have it booked it in to be done as soon as I source the clamps.

I only need the threaded clamp piece as all the feet are present, believe 8 are required?
Post #931872 30th Nov 2021 1:27pm
View user's profile Send private message View poster's gallery Reply with quote
bodstruck



Member Since: 09 May 2020
Location: Wiltshire
Posts: 770

United Kingdom 
They are a very simple design. Not too much of a stretch to make them yourself or have fabricator knock them up for you.
Post #931873 30th Nov 2021 1:31pm
View user's profile Send private message View poster's gallery Reply with quote
MattyEssex



Member Since: 23 Jul 2021
Location: Essex
Posts: 77

United Kingdom 2010 Defender 110 Puma 2.4 XS CSW Indus Silver
Someone has kindly put the dimensions up in a previous post so think may have to go this route - I'll speak to the company who is going to powder coat to see if they are able to fabricate these for me.\

thanks for you advise and help !
Post #931874 30th Nov 2021 1:34pm
View user's profile Send private message View poster's gallery Reply with quote
MattyEssex



Member Since: 23 Jul 2021
Location: Essex
Posts: 77

United Kingdom 2010 Defender 110 Puma 2.4 XS CSW Indus Silver
Just by way of update found the clamps so all good only missing the nuts - am I right in thinking these are self locking M8 nuts?

Need to get them ordered to pickup the rack and take it to be Powder coated so keen to get some ordered ASAP.

thanks
Post #932600 6th Dec 2021 10:36am
View user's profile Send private message View poster's gallery Reply with quote
Likeomg



Member Since: 29 Jun 2012
Location: Lake District / Newcastle
Posts: 2623

2010 Defender 90 Puma 2.4 HT Stornoway Grey
yes, m8.

when I got my Hannibal maybe 5 years ago now, it came without the clamps... seem to be a recurrent thing, missing clamps.
Post #932607 6th Dec 2021 12:09pm
View user's profile Send private message View poster's gallery Reply with quote
MattyEssex



Member Since: 23 Jul 2021
Location: Essex
Posts: 77

United Kingdom 2010 Defender 110 Puma 2.4 XS CSW Indus Silver
Glad I found them so everything can be power coated together.

M8 nuts ordered, thanks for help !
Post #932621 6th Dec 2021 2:04pm
View user's profile Send private message View poster's gallery Reply with quote
MattyEssex



Member Since: 23 Jul 2021
Location: Essex
Posts: 77

United Kingdom 2010 Defender 110 Puma 2.4 XS CSW Indus Silver
Dropped all off today for Power Coating Thumbs Up
Can anyone advise where to source some rubber pads so I can reapply afterwards. Not sure needs replacing on the cross members as nothing actually goes on these as below the main rails but for the clamps certainly and to go along ladder when against car body?

These maybe https://www.amazon.co.uk/perfect-ideaz-col...amp;sr=8-5
Post #932933 9th Dec 2021 7:11am
View user's profile Send private message View poster's gallery Reply with quote
bodstruck



Member Since: 09 May 2020
Location: Wiltshire
Posts: 770

United Kingdom 
The foam on the cross pieces will stop it rattling if there is no load on there. I used some 40mm self adhesive neoprene for that and the feet.

https://www.ebay.co.uk/itm/Neoprene-Self-A...635-2958-0
Post #932935 9th Dec 2021 7:36am
View user's profile Send private message View poster's gallery Reply with quote
MattyEssex



Member Since: 23 Jul 2021
Location: Essex
Posts: 77

United Kingdom 2010 Defender 110 Puma 2.4 XS CSW Indus Silver
Ah makes sense he mentioned process may melt the pieces between the two rails so not sure how I'd replace between, perhaps can slip it underneath.

Cannot find 4mm so thinking 6mm will be ok https://www.amazon.co.uk/gp/product/B07VFS...&psc=1
Post #932951 9th Dec 2021 10:20am
View user's profile Send private message View poster's gallery Reply with quote
bodstruck



Member Since: 09 May 2020
Location: Wiltshire
Posts: 770

United Kingdom 
I took mine apart completely before taking it to be blasted and powdercoated. The cross rails unbolt. In the right in this pic.



Click image to enlarge
Post #932954 9th Dec 2021 10:46am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 2 of 3 <123>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums