↓ Advertise on Defender2 ↓

Home > 130 > Moving to a 130
Post Reply  Down to end
Page 3 of 3 <123
Print this entire topic · 
Dowks



Member Since: 29 Nov 2012
Location: Surrey
Posts: 35

United Kingdom 2015 Defender 130 Puma 2.2 HCPU Keswick Green

Hood on, very pleased with it fit wise. Also added a Mota Lita wheel to give me a bit more cabin space. Both rear door shedders full of holes so in order to stop the carpets getting wet

Trip out with the kids down a nice Sandy Lane today



Click image to enlarge

Post #875873 2nd Jan 2021 3:29pm
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 12466

United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

For info when you sort out the rear door water shedders you may want to add an additional home-made shedder.

I found my rear floor was always getting wet when it rained, from water entering the door between the glass and the door skin (even with good seals there is a significant ingress. After puzzling about the door drainage for a while, I realised that the factory shedder actually directs water inside the vehicle! I added some conventional shedders cut from builders' plastic sheet (the sort used for a DPM in concrete floors) and taped it inside the door to direct water to the drain holes right at the bottom. Since doing this I have had no water at all in the back.

Post #875875 2nd Jan 2021 3:52pm
View user's profile Send private message View poster's gallery Reply with quote
Dowks



Member Since: 29 Nov 2012
Location: Surrey
Posts: 35

United Kingdom 2015 Defender 130 Puma 2.2 HCPU Keswick Green

Thanks for the tip. My shedders had loads of holes in where the previous owner had added checker plate bottoms to the door and mounted them with self tappers through the shedder...... plus the grommet for the window electrics

Will go get some plastic sheet, and more mastic!

Post #875907 2nd Jan 2021 5:46pm
View user's profile Send private message View poster's gallery Reply with quote
JOW240725



Member Since: 04 May 2015
Location: Suffolk
Posts: 6700

United Kingdom 2012 Defender 110 Puma 2.2 XS CSW Orkney Grey

That looks amazing, really like it! Nice looking lane too! James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers

Post #875999 3rd Jan 2021 8:26am
View user's profile Send private message View poster's gallery Reply with quote
tookaphotoof



Member Since: 18 Mar 2013
Location: dordrecht
Posts: 1264

Netherlands 2013 Defender 130 Puma 2.2 HCPU Santorini Black

blackwolf wrote:
For info when you sort out the rear door water shedders you may want to add an additional home-made shedder.

I found my rear floor was always getting wet when it rained, from water entering the door between the glass and the door skin (even with good seals there is a significant ingress. After puzzling about the door drainage for a while, I realised that the factory shedder actually directs water inside the vehicle! I added some conventional shedders cut from builders' plastic sheet (the sort used for a DPM in concrete floors) and taped it inside the door to direct water to the drain holes right at the bottom. Since doing this I have had no water at all in the back.


Never af any leakage on the rear floor. The front however...

Post #876001 3rd Jan 2021 8:54am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 3 of 3 <123
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2021 Futuranet Ltd & Martin Lewis