↓ Advertise on Defender2 ↓

Home > Tdi > Rebores
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Paroak



Member Since: 16 Dec 2020
Location: South Wales
Posts: 2

United Kingdom 1987 Defender 110 300 Tdi CSW Masai Red
Rebores
I need to get a 300 TDi rebored asap. Was going to go with +20 thou but my son said why not get it rebored to 2.8l? Without any research, (YET) is it worth it, is there any real gain in power, loss in reliability? I currently run through a LT77 box but have the option of changing to a R380. Are there any gains in either options? I intend to travel and want reliability above performance but wouldn't mind gaining in fuel economy if possible. Do I want the Earth? Yes. Can I have it? It is up to you! Very Happy Don't forget to forge your dragons as you smell the roses along the walk of life.

Paroak
Post #873370 16th Dec 2020 9:56pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Blackhat90



Member Since: 31 Dec 2016
Location: Forfar
Posts: 86

Scotland 1995 Defender 90 300 Tdi HT Epsom Green
Needing a rebore? does it blowpast rings ?,, mines is on 380,000 miles and fine, As for the R380 box, yeh its a stronger box than the LT77,, and reverse is in the correct place, [ you dont hit rev ,when looking for 1st],,,economy ? you can fit a dicovery transfer box,, [higher ratio],, but not good for towing heavy trailers,,
Post #873929 20th Dec 2020 10:01pm
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11240

United Kingdom 2013 Defender 110 Puma 2.2 USW Orkney Grey
There's more to building a 2.8 than just re-boring it. They're also incredibly torquey and you'd really need to move to an R380 box for reliabilty. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #873969 21st Dec 2020 11:44am
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3140

Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
Were the bores measured for wear and found to be out of specifications to decide for a rebore?

I think the later LT77 were quite strong. My 1988 box is suffix E, which is not the strongest, but have a stronger reverse gear compared to suffix D! Only if I drive more backwards Rolling with laughter 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #873980 21st Dec 2020 12:56pm
View user's profile Send private message View poster's gallery Reply with quote
sako243



Member Since: 08 Jul 2014
Location: Wales
Posts: 1184

Wales 1994 Defender 110 300 Tdi CSW Alpine White
The 2.8TGV which is what I assume you mean by boring out to 2.8 has a larger bore (ok you have that one ticked). Longer stroke crank (provides the extra torque to a certain extent) thus requires different pistons, rings, con rods, big ends, crank, bearings. The head and block if I remember correctly also have extra cooling channels (or rather they are not blocked off) but they may not be needed. There's also a different turbo if you're talking about getting a proper TGV setup. Ed
82 Hotspur Sandringham 6x6
95 Defender 110 300Tdi
Post #874017 21st Dec 2020 5:51pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums