DEFENDER2.NET - View topic - Starting Problems

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Starting Problems

Page 1 of 1

Print this entire topic ·

jbullis

Member Since: 28 Apr 2013
Location: Jonesborough, TN
Posts: 24

Starting Problems

I have a 2012 2.2, with about 21K miles. I haven't had it long, but the only way I can get it to crank is turn turn the key on. Wait for the glow plug light to go out(you try to start it then, nothing happens). I turn the key back off, then on and it always starts up. Whats going on, or what am I doing wrong?

I have also shot a video of this, if that helps...

Thank you

27th Jun 2020 2:14am

williamthedog

Member Since: 29 Dec 2012
Location: south wales
Posts: 3441

Check the tightness of the relays in their connectors under the seat.

27th Jun 2020 6:22am

jbullis

Member Since: 28 Apr 2013
Location: Jonesborough, TN
Posts: 24

I tired the relays, they are all pushed in tightly.

27th Jun 2020 5:10pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11240

2013 Defender 110 Puma 2.2 USW Orkney Grey

This thread may help:

https://www.defender2.net/forum/topic51335.html Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

27th Jun 2020 5:18pm

jbullis

Member Since: 28 Apr 2013
Location: Jonesborough, TN
Posts: 24

I've been messing with it enough to determine that if I don't press the unlock on the immobilizer(if its not set), I have to go into the on then off again exercise. If I preemptions the unlock it fires on the first turn. Will changing the batteries in the FOB correct this? Or do I need to go into a different direction?

27th Jun 2020 11:33pm

Pat

Member Since: 05 Dec 2016
Location: Somewhere new!
Posts: 366

Do you have a second fob? If yes, have you tried starting the vehicle with it?

I have one fob that starts my vehicle as it should and a second fob that only operates in a similar way to what you describe. I replaced fob batteries, tried re syncing the fob, but no change. Posted on the forum about this, but didn't get a solution. Tried a main dealer, but they wanted my 90 (MY 2012) in for investigation at their hourly rate, so I decided to live with a second fob that doesn't do what it should. It started with a kiss, never thought it would come to this.
SIII CSW Safari, limestone, (JAC 914N). Where is she now?

It's not a car, it's a way of life!

28th Jun 2020 7:36am

jbullis

Member Since: 28 Apr 2013
Location: Jonesborough, TN
Posts: 24

Good point. I only have 1 Fob. I’ll order another. I’ll also see if I can use the Nanocom to to reprogram my current Fob too.
Thanks

28th Jun 2020 1:51pm

jbullis

Member Since: 28 Apr 2013
Location: Jonesborough, TN
Posts: 24

After doing more research and messing with my Nanocom, in the 10AS, set the passive imbolize off. It fixed my problem. Help this can help others.

Click image to enlarge

30th Jun 2020 1:47am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum