↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Braided Brake Lines Puma 90 Rover Diffs
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Rickoz



Member Since: 27 Jan 2014
Location: 4000
Posts: 39
Australia 2014 Defender 90 Puma 2.2 SW Keswick Green
Braided Brake Lines Puma 90 Rover Diffs
Hi all, I’ve contacted Hel Performance here in 🇦🇺, they need a little more information.
I have a 2014 Defender 90 with Rover Diffs front & rear, I wish to use Extended Braided Lines.

Can I confirm the STD lengths for the Front are 425mm, the Rears are 400mm of the Rover Diffs?

The end fittings are covered in a plastic wrap so they could not see the type of fittings used on the front or rear, can someone confirm the type of fittings used on the ABS Rover Diffs.

It looks like they use a single line on the front and a second wire line must be for the ABS, how & what do you use to Extend these ABS Lines? (I’m wanting to extend the Brake Lines by about 130cm at least)

Any pictures of the correct fittings used on the end of the lines would help tremendously.

Why don’t I just buy online from a store in the 🇬🇧, sadly they won’t comply with our nanny state ADR laws.
Thanks in advance for any help & pictures you can provide, regards.
Post #791320 9th Sep 2019 2:18am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums