↓ Advertise on Defender2 ↓

Home > Td5 > gear selector housing removal in situ
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
kevinf



Member Since: 12 Apr 2011
Location: sheffield
Posts: 55

United Kingdom 
gear selector housing removal in situ
Hi all I need to remove the gear selector housing from my r380 gear box due to it jamming in gear
can this be done with out removing the gear box, and if so what's the procedure, I'm hoping its the grub screw that's come loose I've already removed the gear lever turret and the transfer box selector lever housing, but it still jams in 5th gear (when I pull it out of 5th it doesn't find the gate to allow the gear lever to move across)


cheers in anticipation kevin
Post #780021 3rd Jul 2019 11:28am
View user's profile Send private message View poster's gallery Reply with quote
4RF RDS



Member Since: 19 Jul 2015
Location: Ottawa
Posts: 890

Canada 2000 Defender 110 Td5 XS CSW Epsom Green
It can be totally done in situ. Thirteen screws on the tunnel cover, two 10 mm on the parking brake lever and you will have complete access. Don’t need to remove any of those to check the grub screw though, just pull up the shifter boot and remove the knobs, undo the shift lever and remove the turret. You’ll have full access.

Good luck 2010 Range Rover MkIII Autobiography Super Charged (Idris)
2003 Range Rover Mk III (Desmond FitzWilliam)
2000 Defender 110 CSW TD5 (CTX)
1992 Range Rover Classic (Lizzy)
1972 Series III 300 Tdi (Stanwood)
1967 MGB GT

Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.
H. L. Mencken (1880 - 1956)
Post #780086 4th Jul 2019 12:30am
View user's profile Send private message View poster's gallery Reply with quote
kevinf



Member Since: 12 Apr 2011
Location: sheffield
Posts: 55

United Kingdom 
hi thanks for the reply got the housing off last night, also had to remove the transfer box mountings to allow the transmission to drop down to allow the selector fork to clear ! I had previously removed the turret and checked the front grub screw, total waist of time and effort as the grub screw was tight and the gear selector was tight and notchy with the housing removed and stayed tight until I removed the rear prop and hand brake assembly (X brake) then the selector shaft became free so I put the selector housing back on but still cant select reverse !
scratching head now is it gear box, transfer box Sad

cheers kevin
Post #780129 4th Jul 2019 11:27am
View user's profile Send private message View poster's gallery Reply with quote
4RF RDS



Member Since: 19 Jul 2015
Location: Ottawa
Posts: 890

Canada 2000 Defender 110 Td5 XS CSW Epsom Green
Have you set the bias springs properly? That can affect finding reverse. If so its in the gearbox not the t- case.

Good luck Thumbs Up 2010 Range Rover MkIII Autobiography Super Charged (Idris)
2003 Range Rover Mk III (Desmond FitzWilliam)
2000 Defender 110 CSW TD5 (CTX)
1992 Range Rover Classic (Lizzy)
1972 Series III 300 Tdi (Stanwood)
1967 MGB GT

Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.
H. L. Mencken (1880 - 1956)
Post #780149 4th Jul 2019 1:24pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums