DEFENDER2.NET - View topic - LED upgrade with headlamp levelling motor

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > LED upgrade with headlamp levelling motor

Page 1 of 1

Print this entire topic ·

RRS2

Member Since: 22 Apr 2018
Location: Southampton
Posts: 52

LED upgrade with headlamp levelling motor

I have a 2013MY 110, Could someone please tell me if I change the headlights to LED are the levelling motors just a remove from the old and place on the new? TIA

26th May 2019 4:20pm

ericvv

Member Since: 02 Jun 2011
Location: Near the Jet d'Eau
Posts: 5816

2009 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black

You do not need to touch the levelling motors. Just take the entire halogen lamp units out and install the LED lamps instead. The levelling motors will continue to do their job with the new LED lamps as before.
Eric You never actually own a Defender. You merely look after it for the next generation.
http://youtu.be/yVRlSsJwD0o
https://youtu.be/vmPr3oTHndg
https://www.youtube.com/watch?v=_GtzTT9Pdl0
https://www.youtube.com/watch?v=ABqKPz28e6A
https://www.youtube.com/watch?v=rLZ49Jce_n0
https://www.youtube.com/watch?v=XvAsz_ilQYU
https://www.youtube.com/watch?v=K8tMHiX9lSw
https://m.youtube.com/watch?v=dxwjPuHIV7I
https://vimeo.com/201482507
https://www.youtube.com/watch?v=ZSixqL0iyHw

26th May 2019 4:54pm

RRS2

Member Since: 22 Apr 2018
Location: Southampton
Posts: 52

Thanks Eric

26th May 2019 10:39pm

leeds

Member Since: 28 Dec 2009
Location: West Yorkshire
Posts: 8578

To swop headlights, undo the indicator and side light. When you unplug the side light tie a bit of string to the plug just in case it disappears into the wing, saves spending 5-10 trying to fish it out if you have short fat fingers.

Next push and twist the headlight and ring off the adjustment screws then unplug the H4 connector

Next stage do not undo the small screws/clips over grass/gravel because if you drop the screws it will be difficult to find them.

The rings only go on way so you may have to twist them around to right orientation..

Then reassemble with your new LED headlights which should have an approval mark on.

Brendan

28th May 2019 5:49pm

RRS2

Member Since: 22 Apr 2018
Location: Southampton
Posts: 52

Thanks Brendan, it was the levelling motors I was unsure of, I've had the lights out previously when fitting checker plate to the wing tops

29th May 2019 7:17pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum