DEFENDER2.NET - View topic - ABS Sensor Renewed but what is the brass clip for?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > ABS Sensor Renewed but what is the brass clip for?

Page 1 of 1

Print this entire topic ·

Merlin

Member Since: 30 Oct 2010
Location: Newmarket
Posts: 980

ABS Sensor Renewed but what is the brass clip for?

I've renewed the ABS Sensor, F/N/S, and solved the alarm, ABS + TC, but what is the brass clip for that came in the kit from Bearmach? It isn't on the original wiring. Any thoughts?

Merlin

3rd May 2018 12:26pm

hank

Member Since: 12 Sep 2016
Location: South Wales
Posts: 2237

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

Do you mean the copper bit in the following picture?

If so, it's the sensor bush. It goes down inside the king pin where your ABS sensor is housed. Your king pin would have had the original still in place and is ok to reuse

3rd May 2018 2:07pm

Merlin

Member Since: 30 Oct 2010
Location: Newmarket
Posts: 980

Thanks for explaining. I didn't realise that the sensor bush was replaceable. Changing the sensor has put out the ABS and TC lights but has left me £192 lighter. How can anyone justify that for a bit of wire and a magnet?

Thanks again,

Merlin

3rd May 2018 2:29pm

Jonno

Member Since: 06 Mar 2012
Location: Yorkshire
Posts: 234

2011 Defender 90 Puma 2.4 HT Santorini Black

I got a genuine Bosch one for a Puma for less than 30 quid from GSF.

Identical to the LR part.

9th May 2018 1:39am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum