 | Home > Puma (Tdci) > Turbo boost gauge |
 
|
|
|
| Shax Member Since: 05 Oct 2010 Location: London Posts: 391   
|
I was planning on building a boost gauge for mine, but got distracted.. That was 6 years ago!
I've got the electronicy bit sorted, just need to re-code the microcontroller to measure a positive pressure, and not a decreasing atmospheric pressure / altitude as was the original rocketry spec.. Maybe one day, I'll actually cut the dash and fit it! ... ,-------, .. I [__][_]|__ .. I __ |"_|"__| .. "(o)====(o)" ^^_-^-_^-^_^^^^^--^^^^ PAUL G7ALW 14.200 USB 26FB458 / 27.275 SSB |
||
19th Oct 2017 12:05am |
|
| 4wheeler Member Since: 13 Apr 2010 Location: Melbourne Posts: 87  
|
Why not fit a Scangauge or Ultragauge? They both show turbo boost and am assuming this is what you are after. I have a Scangauge in my 2.2 Defender and an Ultragauge in my 2.4 Transit. They are set for PSI boost.
They are useful as my Transit occasionally either over boosts causing a malfunction or loses boost. Switching off and clearing the codes fixes the problem until it occurs again but it would be a pain without the Ultragauge. |
||
|
22nd Oct 2017 7:35am |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
