![]() | Home > Technical > Retrofitting headlight motors td5 |
![]() ![]() |
|
|
rallysteve Member Since: 10 Feb 2014 Location: Cumbria Posts: 2242 ![]() ![]() ![]() |
I did it to my 2002. Wiring already behind the dash for the switch, just plug one in (switch is specific to the 90 and 110 and discovery one is different again).
You also need the different headlight bowls and a pair of motors. The wiring should be in place for these anyway. Be aware that some people have had issues with LED headlights not fitting the bowls quite right and the motors burning out. Steve 02' 110 TD5 Double Cab Rebuild Thread |
||
![]() |
|
Welkman Member Since: 02 Nov 2014 Location: Essex colchester Posts: 333 ![]() ![]() |
Thanks, just what i anted to know. I am not planning on LED just the wipac crystals so I hope I will be ok.
James |
||
![]() |
|
rallysteve Member Since: 10 Feb 2014 Location: Cumbria Posts: 2242 ![]() ![]() ![]() |
Yeah same as my setup
![]() |
||
![]() |
|
grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4802 ![]() ![]() ![]() |
Funnily enough I was looking at this exact mod yesterday! Where did you source your leveling motors and bowls from? The are some complete bowls motors and lights on eBay for about £70. Seems quite good value
![]() 1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
![]() |
|
Welkman Member Since: 02 Nov 2014 Location: Essex colchester Posts: 333 ![]() ![]() |
Yes I went ebay for these as I have a week off next the week after next and want everything ready to go to complete the rewire !
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
