 | Home > eBay & Bargain Spots > 1950 Tickford bodied Series 1 up for auction |
 
|
|
|
| Wild Card 90 Member Since: 03 Dec 2014 Location: Gerlingen Posts: 1060   
|
http://www.silverstoneauctions.com/1950-la...y-tickford
 1998 Tdi 90 SW,
2008 Td4 90 SW, 2012 2.2 90 SW, 2" raised Trailmaster/Terrafirma Heavy Track Raids, 255 MTīs, Recaro CSīs, anorak, wellingtons |
||
29th Feb 2016 12:38pm |
|
| blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17887  
|
That front grille was (if memory serves me right) introduced for the 1951 model year (1610... models) so it is not impossible that an 0620 vehicle had it fitted from new. It might also be a contemporary upgrade since the illumination from the behind-the-grille lights is specatcularly poor.
Are you referring the to the bonnet wheel carrier? If so, again it could have been fitted at any time. I reckon that is a very nice little vehicle! I don't know what it'll make, but I wouldn't be surprised in the current climate to see it make its estimate. It'll be interesting to see. |
||
|
29th Feb 2016 2:14pm |
|
| smb Member Since: 15 Jan 2013 Location: Cheshire Posts: 1233 
|
I'd quite fancy Lot 317. One of the first 150 built with both front winch and rear drive for a belt
http://www.silverstoneauctions.com/1948-la...e%20engine |
||
|
29th Feb 2016 2:55pm |
|
| blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17887
|
Yes, very nice, I'd have that in a flash!
The restoration though is rather let down by the door hinges, and I find it hard to understand why they are as they are. As far as I know, 80" vehicles left the factory with the horizontal edge of the hinge at the top on the top hinge and the bottom of the bottom, so that the row of bolts passed through the edge of the internal reinforcing section. On the later vehicles (86"/88" and 107"/109"), the reinforcing section was deeper vertically so the hinges were transposed, even though the same hingers were used. There may have been some exceptions on the very, very early models, and I'd have to do some research to be sure. However, the situation seen on HDG600, where the nearside door has the hinges "86-style" and the offside door has both hinges straight edge uppermost, must surely be a mistake! |
||
|
29th Feb 2016 5:50pm |
|
| Andy80 Member Since: 31 May 2013 Location: Essex Posts: 492 
|
It's pretty spot on! 5 Chassis numbers from the change over to 7" headlights the lack of Spare wheel cover looks wrong but correct nevertheless Working towards Carry on camping! |
||
|
29th Feb 2016 6:36pm |
|
| Romadog Member Since: 07 Jul 2011 Location: Powys Posts: 1750 |
Silverstone Auctions are currently packing up after an auction at Stoneleigh this weekend. Spotted a 109 CW in the marquee this morning and some other mint motors too.
|
||
|
29th Feb 2016 6:37pm |
|
| GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10384
|
Tickford.... Ye Olde Kahn.
|
||
|
29th Feb 2016 10:50pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
