DEFENDER2.NET - View topic - Think I Have Found The Coolant Loss Fault :(

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > Think I Have Found The Coolant Loss Fault :(

Page 2 of 2

Print this entire topic ·

shaggydog

Member Since: 12 Aug 2012
Location: Kent
Posts: 3346

1991 Defender 110 200 Tdi USW Arles Blue

Very generous offer Slim, Thank you

I will take it apart slowly and then have a look and see what we find.

In the mean time if a good one comes available I will pounce on it

Running Restoration Thread http://www.defender2.net/forum/post323197.html#323197

Self confessed mileage hunter

14th Sep 2015 8:55pm

shaggydog

Member Since: 12 Aug 2012
Location: Kent
Posts: 3346

Quote:
I've got a whole spare motor here but its done the best part of 400k so I'd be a bit dubious putting her to go again without a tear down and a set of shells Laughing

Haha, I'd love an evening project once the immediate issues are solved Running Restoration Thread http://www.defender2.net/forum/post323197.html#323197

Self confessed mileage hunter

14th Sep 2015 8:57pm

Fatboy Slim

Member Since: 04 Feb 2008
Location: Bridgend
Posts: 1006

Rip it to shreds. Take some pictures and stick them up. You will fix it with the minimum of fuss and bother I can assure you. It's only a dirty old diesel mate

14th Sep 2015 8:58pm

shaggydog

Member Since: 12 Aug 2012
Location: Kent
Posts: 3346

Thanks Slim

I am confident and competent to do it, its just gee'ing myself up for it.

Especially now the evenings are cold and dark.

First challenge is shoving it up the drive so I can work on it close to the workshop rather than half way down the drive blocking everything in.

Running Restoration Thread http://www.defender2.net/forum/post323197.html#323197

Self confessed mileage hunter

14th Sep 2015 9:01pm

g-mack

Member Since: 07 Jan 2014
Location: northumberland
Posts: 1967

ah shags, its looking poorly!!! get the head of quick b4 the cold weather and dark nights come! you will do it in a weekend!

My 109 thread

my youtube channel

14th Sep 2015 9:22pm

grumpy old git

Member Since: 16 Nov 2013
Location: United Kingdom
Posts: 153

I wouldn't be too worried about leaving the head off for a few days, when I did my SIII the head was off for probably close on a month while I did the work to the head, I just gave the exposed parts a spray with WD40 and left an oily cloth over the block to keep any bits out. All went together well and no problems.

15th Sep 2015 7:32pm

Gonarezhou

Member Since: 08 Mar 2015
Location: White River
Posts: 178

2015 Defender 110 Puma 2.2 SW Alaska White

Yep the head gasket is gone - the replacement will look different so don't worry. I had the same on my 200TDi - not a complicated replacement....I did mine without any problem I just followed the instructions in the RAVE manual to the letter. I suggest you replace the head bolts at the same time and follow the torque sequence with the angle guage carefully.

15th Sep 2015 10:57pm

Page 2 of 2

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum