DEFENDER2.NET - View topic - Fan control terminals

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Fan control terminals

Page 1 of 1

Print this entire topic ·

Northernremedy

Member Since: 18 Aug 2014
Location: Yorkshire
Posts: 122

Fan control terminals

Hello!

Whilst re- plumbing my aerial cables due to a cock up I took the instrument binnacle out.

On the left hand side the heater blower control, there's one terminal at the top and two at the bottom. I'm not sure if they were ever connected or not but o noticed that the one up from bottom ie middle was connected but the wire to the one at the top and the wire to one at bottom weren't connected.

Should they be?

Thanks! It's a standard td5 county with no air con

28th Jun 2015 8:24pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6482

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

Top connection (body of blower switch) - black - ground
Middle connection - green/yellow - speed 1 (slow)
Bottom connection - green/slate - speed 2 (less slow)

1988 90 Td5 NAS soft top

2015 D90 XS SW

29th Jun 2015 9:28am

Northernremedy

Member Since: 18 Aug 2014
Location: Yorkshire
Posts: 122

Amazing!!!! Thank you.

I'd better whip it off and check. I took my best guess and it seems to work fine so I assume it must be correct.

Thanks Martin

29th Jun 2015 9:46am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum