DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > ERG Removal

Page 1 of 1

Print this entire topic ·

Tank

Member Since: 25 Jul 2014
Location: Fife
Posts: 431

ERG Removal

So !

Bought a Britpart ERG kit.

The ERG valve came off really easily and wasn't that mucky inside ! Oh well. The pipe to the intercooler was easy, a nice blue silicone one ooohhh sexy replaces the old one !

The vacuum pipes blocked off and the electrics to the ERG all sorted, great this is simples ! !

OK the other side . . . . . fek.

I could get the pipes off the heat exchanger no problem (its a 2004 TD5) but one of the bolts connecting the pipe to the manifold was A. difficult to get at and B. probably now rounded off due to my efforts. Looks like the exhaust manifold will have to come off to get at it !

My question is;

I have discounted the pipe for the heat exchanger but it is still connected to the exhaust manifold. As a temp fix I have then bolted the blanking plate onto the pipe from the manifold, where this would go into the heat exchanger. Its a good seal and I wondered if I could get by with the bodge for a while before I have to take the whole manifold off ?

Thanks

Duncan

14th Sep 2014 11:34am

landy andy

Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5424

2006 Defender 110 Td5 USW Zermatt Silver

Yes I think will be ok. The exhaust is effectively blocked off as it would be with kit, just further along the system.

Andy

Ps

Do yourself a favour. Stop buying Britpart stuff, it is poo

14th Sep 2014 12:32pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 16892

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

As long as there is no leak of exhaust gasses it should be ok indefinitely.

I removed the whole of the heat exchanger eventually and in so doing fixed a slow coolant leak which had eluded me for about 2 years!

I second what Andy says about Britpart.

14th Sep 2014 12:33pm

Tank

Member Since: 25 Jul 2014
Location: Fife
Posts: 431

I am learning about Britpart stuff !

I originally thought it was good but the wheel carrier (swing away) is a bit poo ! Cheap and half the price of the others but still poo.

The ERG valve issue is not Britpart it was more the fact that the bolt was seized and I f'k it !

Ah the joy of landrover ownership ! ! !

Cheers for advice

Duncan

14th Sep 2014 2:04pm

Tank

Member Since: 25 Jul 2014
Location: Fife
Posts: 431

How do you take the rest of the heat exchanger off ? Do I need to block up either end if I don't ?

Cheers again

Duncan

14th Sep 2014 2:05pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 16892

I had already blanked the exhaust at the manifold, so only the coolant pipes were still connected. One of these comes from somewhere round the back of the block under the inlet manifold (fuel cooler or something, I forget), the other to the header. I simply replaced both of these with a new hose straight to the header, though I did need a reducer since 1 pipe is much bigger than the other.

This is on a Disco, not a Defender, but the principle is the same.

I only did it because I like simplicity and don't like having bits that aren't needed bolted on. It was an unexpected bonus that it fixed the slow leak (which I had always attributed to the threaded core plug under the exhaust manifold).

14th Sep 2014 8:54pm

ozzy57

Member Since: 14 Feb 2014
Location: Farnborough
Posts: 221

I left my heat exchanger in place. My thinking was/is a bit more cooling (possibly) can't be a bad thing. It wasn't me!

15th Sep 2014 7:37pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6038

Regarding the manifold end cap bolts..... heat works, so, go for a nice 30 miles drive, then get home and try to undo them... you might find the heat from the exhaust itself is enough to shift it... also plenty of penetrating oil beforehand (might smoke a bit when you're driving mind)

15th Sep 2014 8:07pm

Tank

Member Since: 25 Jul 2014
Location: Fife
Posts: 431

Cheers Jim will try that although I might have rounded it off now will all the "trying" !

Duncan

15th Sep 2014 8:15pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum