 | Home > For Sale & Wanted > [For Sale] Nakatanenga rear door strut kit |
 
|
|
|
| borderterrier Member Since: 09 Dec 2011 Location: Surrey Posts: 1677   
|
Does this fit a 2012 model mate?
|
||
10th Jun 2014 10:31pm |
|
| borderterrier Member Since: 09 Dec 2011 Location: Surrey Posts: 1677
|
If so I will take it. Daft question above really!
|
||
|
10th Jun 2014 10:32pm |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8582
|
It will fit all post 2002 rear door. Instructions are included.
Probably hardest job is getting rear door card off. Ensure that the gas strut does not touch door frame. If you have a storage drawer fitted a bit of care is needed to make sure drawer clears door You have to control the opening of the door so it does not go bang on to a hard stop. HTH Brendan |
||
|
10th Jun 2014 10:40pm |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8582
|
Especially when it says post 2002 on the card header 
Brendan |
||
|
10th Jun 2014 10:41pm |
|
| borderterrier Member Since: 09 Dec 2011 Location: Surrey Posts: 1677
|
I didn't zoom in on the photo!
|
||
|
10th Jun 2014 10:43pm |
|
| bear100 Member Since: 22 Mar 2010 Location: South Wales Posts: 2025  
|
Cheers Brendan Yours borderterrier  2023 Defender L663 V8
2016 Range Rover Autobiography 4.4 TDV8 (gone) 2010 110 XS Utility 2.4TDCI 2010 Range Rover Sport TDV8 (gone) 2007 Discovery HSE TDV6 (gone) 1993 110 csw 200 tdi (gone) 1994 90 HT 300 tdi (gone) 1994 discovery 300tdi (gone) 90 hybrid 3.5 v8 (gone) Range rover bobtail 3.5 v8 (gone) |
||
|
10th Jun 2014 10:44pm |
|
| borderterrier Member Since: 09 Dec 2011 Location: Surrey Posts: 1677
|
How do want paying mate?
|
||
|
10th Jun 2014 10:49pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20939
|
When fitting just be carefull drilling your holes, it would be very easy to run the drill bit right through and out the other side of the door skin!
( I had a lucky escape!  ) |
||
|
10th Jun 2014 11:00pm |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8582
|
Will have to remember to check the instruction leaflet. Think we do mention that danger.
We might have to highlight that possible danger. There again it might be a case of people reading the 'destruction' leaflet properly 
On a more serious note however if people think any information we supply could be improved please let us know. However please remember we are a small company so do have limitations on what we can do. Apologies for going OT but that is the way conversations go at times Brendan |
||
|
10th Jun 2014 11:09pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20939
|
I don't think there was instructions at the time with mine, but it probably was German if there was I cannot remember.
|
||
|
10th Jun 2014 11:30pm |
|
| borderterrier Member Since: 09 Dec 2011 Location: Surrey Posts: 1677
|
Payment sent
|
||
|
11th Jun 2014 6:28am |
|
| borderterrier Member Since: 09 Dec 2011 Location: Surrey Posts: 1677
|
Mate, please confirm that you have received the money for the door strut?
|
||
|
11th Jun 2014 8:48pm |
|
| bear100 Member Since: 22 Mar 2010 Location: South Wales Posts: 2025
|
Yes received thank you, it will be in the post tomorrow,
Many thanks hope you will be happy with it 2023 Defender L663 V8
2016 Range Rover Autobiography 4.4 TDV8 (gone) 2010 110 XS Utility 2.4TDCI 2010 Range Rover Sport TDV8 (gone) 2007 Discovery HSE TDV6 (gone) 1993 110 csw 200 tdi (gone) 1994 90 HT 300 tdi (gone) 1994 discovery 300tdi (gone) 90 hybrid 3.5 v8 (gone) Range rover bobtail 3.5 v8 (gone) |
||
|
11th Jun 2014 9:00pm |
|
| leeds Member Since: 28 Dec 2009 Location: West Yorkshire Posts: 8582
|
Well that rear door strut does have instructions with it.
Have checked that there is a warning about taking care when drilling the rear door. However I think we will have to highlight it more when the next time we print some off. OK we have wandered off topic a bit but I do not think we have spoiled the thread. Brendan |
||
|
11th Jun 2014 10:15pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
