DEFENDER2.NET - View topic - Chassis repair pannel outrigger to radius arm tie

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Chassis repair pannel outrigger to radius arm tie

Page 1 of 1

Print this entire topic ·

EMPI748

Member Since: 15 Dec 2012
Location: Penicuik, Midlothian
Posts: 50

Chassis repair pannel outrigger to radius arm tie

Applying a bit of rustproofing to my chassis today and stuck my finger through a bit of the bulkhead outrigger. Patched it about 18 months ago and it had been patched in the past so going to stick a new one on this time.

Can anyone tell me if there is a panel available to replace the top triangle bit between the outrigger, the chassis and the radius arm tie. Radius arm is STC8695 and outrigger is STC8354. Am i just miss visualizing it and it's included or is there a separate piece needed? There was metal below the bit circled and the radius arm, apologies for the poor photo only had my phone with no flash..

It's a 2000 TD5 if it makes a difference.

Cheers
Stu

Click image to enlarge

11th May 2014 10:45pm

EMPI748

Member Since: 15 Dec 2012
Location: Penicuik, Midlothian
Posts: 50

Couple of slightly clearer pictures, I cut the bit between out as it was rotten:

Click image to enlarge

12th May 2014 11:18am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum