DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Diff Rebuild

Page 1 of 1

Print this entire topic ·

greenoval25

Member Since: 12 Apr 2013
Location: Essex
Posts: 37

Diff Rebuild

I have put a 4 pin centre in the rear diff of my 300 tdi 90.

While its in bits I decided to replace all the bearings.

I have got the new bearings in and the diff back together, I have used the original shims and I think the pinion height is set correctly but I'm not 100% sure.

This is the first diff I have put back together.

Here are a couple of pictures of the contact patches I have got.

Click image to enlarge

Click image to enlarge

I have got 0.004" of backlash.

Click image to enlarge

Click image to enlarge

I don't want to get it all back in the 90 only to find it whines.

So have I got it right or am I going to have to make up a height gauge and get some shims sorted out?

Kev

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

9th Jul 2013 10:06pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum