 | Home > Puma (Tdci) > Belgian 130 HCPU says hi! |
 
|
|
|
| ericvv Member Since: 02 Jun 2011 Location: Near the Jet d'Eau Posts: 5816   
|
[quote="Taquito
Any thoughts on a "classy" steering wheel? The ones I found on the net escaped from a "fast and the furious tuning beats" car. Grtz!![/quote] Very simply said, Starwood in Gemany. They make an absolute magnificent steering wheel, which Land Rover two years ago used for the Defender Black Pearl limited edition. I saw the Black Pearl edition at my dealer in Geneva, and it was a stunner. The steering wheel looked so fantastic that I first tried to order it from LR, but they needed a Black Pearl VIN 
So after a little research I found out that the entire cosmetic transformation was done by Startech, and I managed to order direct from them. Mind, on the Black Pearl edition the leather stitching is cognac coloured to match the seat trim. For my SVX I ordered it with black stitching. You also have to make sure first that your steering wheel sits on a 48 spline (most likely) or on a 36 spline adaptor. You get the adaptor with the steering wheel from Startech, as well as the original LR logo installed on it. Hearsay that both 48/36 are still being used by LR today, although I believe that most of the time it is the former. The best thing apart from the looks is that after I installed it, the smaller size steering wheel means a world of difference in comfort. Here is a link to the Black Pearl edition. http://www.landrover.com/content/switzerla...kPearl_SWF If interested you can contact Startech as below. They provided an absolute first class service when I ordered it from them. My entire contact was by e-mail exchanges with Ms. Wiky Petraki. CRD Car Research & Development GmbH & Co.KG Vertrieb Sales Manager i.A. Wiky Petraki Phone: +49(0)2041/7744-557 Fax: +49(0)2041/7744-544 mailto: wiky.petraki@startech.de Internet: www.crd-germany.com www.startech.de Keep us in the loop of what you do  You never actually own a Defender. You merely look after it for the next generation.
http://youtu.be/yVRlSsJwD0o https://youtu.be/vmPr3oTHndg https://www.youtube.com/watch?v=_GtzTT9Pdl0 https://www.youtube.com/watch?v=ABqKPz28e6A https://www.youtube.com/watch?v=rLZ49Jce_n0 https://www.youtube.com/watch?v=XvAsz_ilQYU https://www.youtube.com/watch?v=K8tMHiX9lSw https://m.youtube.com/watch?v=dxwjPuHIV7I https://vimeo.com/201482507 https://www.youtube.com/watch?v=ZSixqL0iyHw |
||
3rd Apr 2012 5:47am |
|
| LR90XS2011 Member Since: 05 Apr 2011 Location: bickenhill Posts: 3615  
|
if you want a less pricey steering wheel Alive (site sponsor) do Momo cheeper than you can get them elsewhere and a 48 spline adaptor see thier web site but be carefull some have red stiching DEFENDER 90 TDCI XS,
I hope everyone is well and your land rovers make you happy |
||
|
3rd Apr 2012 6:00am |
|
| Taquito Member Since: 19 Jan 2012 Location: Limburg Posts: 15  
|
 Click image to enlarge The cubbybox has arrived  just the basic exmoor cubby. Although the diamond stitched one looked so awesome
Hope to find the time and fit it tomorrow Seems pretty straightforward but tips for installing are always welcome, it might save me some time and headaches  haha
Grtz! Carlos |
||
|
21st Apr 2012 3:58pm |
|
| Taquito Member Since: 19 Jan 2012 Location: Limburg Posts: 15
|
Hi guys!
Found some time to post a pic of the cubby in the cab. Slapped 2 pieces of white oak underneath to elevate it about 6-8cm give or take, it was too low at first. Now it's just right
 Click image to enlarge Also, another question, I now want to get me an A-bar and some lights. Was thinking of getting the Lightforce170's does the quality of these things do the price any justice or are these just overpriced due to exessive marketing? 
Back to the A-bar, have read some stories on belgian forums in regards to road legal issues and a-bars, turns out that the only one everybody agrees on that is 100% road legal is the soft rubber kind of a-bar. The OEM one right?  Click image to enlarge But the price of those are through the roof, +- 100£ for a regular tubular a-bar Vs. 700£ more or less for a land rover rubber one. So if someone can shed some light on this, it would be much appreciated
Grtz!! Carlos |
||
|
6th May 2012 3:36pm |
|
| xatzhs Member Since: 12 Dec 2010 Location: Northumberland & Down South Posts: 258 
|
 £700!!! Definitely not. They're expensive, granted, but I'd say anywhere between £350 and £500 depending on if you can get a good deal. 2nd hand as well are okay. You can also get cheaper ones somewhere that are identical but don't have the DEFENDER lettering on the front, can't remember where from though. I paid a little over £400 for mine. |
||
|
6th May 2012 3:45pm |
|
| chadjizz Member Since: 25 Apr 2012 Location: sussex Posts: 559  
|
she loooooooks very nice.
i love 130's. what colour is it? |
||
|
6th May 2012 4:33pm |
|
| Taquito Member Since: 19 Jan 2012 Location: Limburg Posts: 15
|
@ xatzhs ; i'll browse the www some more in search of a bargain.
However, is there an added benefit of the rubber other than it being softer for the things you might bump into 
@chadjizz ; as you can see on the first page in this topic, my little tank is in zermatt silver. just to be clear the picture of the a-bar is from the web |
||
|
6th May 2012 10:23pm |
|
| xatzhs Member Since: 12 Dec 2010 Location: Northumberland & Down South Posts: 258
|
Definitely have a look, and put up a wanted post on here in the For Sale & Wanted section. Is likely to bring you your best deal (don't hold me to that).
There is no real advantage to it over any others. If anything the brackets that hold it to the top of the grille are rubbish and weak plastic. I've got some big spotlights fitted to it that have connected nicely with the original fittings - I guess that's an advantage! Personally I think they actually look better than most of the others, but that's everyone's personal opinion. (With the exception of the full bullbar on the front of some - have a search for Glynparry's truck, it's pretty rugged if that's the look you're going for) |
||
|
6th May 2012 11:52pm |
|
| ericvv Member Since: 02 Jun 2011 Location: Near the Jet d'Eau Posts: 5816
|
How right that is. One of those two plastic OEM top brackets on mine once got simply torn to pieces in a car wash. Luckily without any other damage, and was easily replaced by a new one without problems. You never actually own a Defender. You merely look after it for the next generation. http://youtu.be/yVRlSsJwD0o https://youtu.be/vmPr3oTHndg https://www.youtube.com/watch?v=_GtzTT9Pdl0 https://www.youtube.com/watch?v=ABqKPz28e6A https://www.youtube.com/watch?v=rLZ49Jce_n0 https://www.youtube.com/watch?v=XvAsz_ilQYU https://www.youtube.com/watch?v=K8tMHiX9lSw https://m.youtube.com/watch?v=dxwjPuHIV7I https://vimeo.com/201482507 https://www.youtube.com/watch?v=ZSixqL0iyHw |
||
|
7th May 2012 5:01am |
|
| landy andy Member Since: 15 Feb 2009 Location: Ware, Herts Posts: 5424 
|
Mantec sell the top brackets made in metal if required, but can't see the need for them personally. A-bars are for hanging lights off not for protection or ramming, if you want that get a full bull bar setup like Glynn Parry's
|
||
|
7th May 2012 7:33am |
|
| Taquito Member Since: 19 Jan 2012 Location: Limburg Posts: 15
|
Hi guys!
I took off the black front grill and headlight surroundings and put on the stock OEM ones in grey to complement the all clear indidators (still waiting on side left and right). I think it looks nice makes it a bit more gentlemen like haha! I also cleaned the sh*t out of the rear alu panels, they really shine now haha
 Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge www.comatra.eu |
||
|
19th May 2012 2:05pm |
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 4990
|
Much better
Whats the little black thing on the side of your wing, sussed it, a camera |
||
|
19th May 2012 4:19pm |
|
| Taquito Member Since: 19 Jan 2012 Location: Limburg Posts: 15
|
Hey Zagato!
Tnx for the compliment and indeed the little black thing on the side (both left and right) are part of the 360° camera view my 130 is blessed with Here below is a short Youtube clip of how the triggers are setup.
http://www.youtube.com/watch?v=NTecHsAe01I&hd=1 Grtz!! Carlos www.comatra.eu |
||
|
20th May 2012 11:56am |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
