Home > Tdi > drips on mrsBPMan's foot ... |
|
|
nosnibod Member Since: 15 Aug 2007 Location: West Midlands Posts: 367 |
It's the master cylinder; it's just above the pedal itself. Dave
Green Goddess - 1998 Defender 110 300tdi |
||
29th Mar 2012 6:56pm |
|
Dave-H Member Since: 08 Feb 2011 Location: Surrey Posts: 1507 |
Can only be clutch master cylinder .. slave cylinder is under the cab mounted on the bell housing Guns and Landrovers .... anything else is irrelevant.
|
||
29th Mar 2012 6:57pm |
|
chiefstoker Member Since: 11 Oct 2010 Location: Weston-super-Mud Posts: 897 |
Just had mine changed, luckily it hadnt gone I was just getting a bit fed up with the slight weep. They really are 'one of the Defenders achilles heels' 2005 TD5 90 Hard Top
Beer 'n Sex 'n Chips 'n Gravy |
||
29th Mar 2012 7:20pm |
|
bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 |
cheers guys, typical I'm off to YOG, so will get looked at on Monday.
at least I can tell the garage what's wrong |
||
29th Mar 2012 8:31pm |
|
Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5012 |
Sounds like the actual part is no good, it's not Sh/tpart is it
|
||
29th Mar 2012 8:50pm |
|
bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 |
both the master and slave cylinders were replaced (with genuine LR new ones) 27th May 2011... so back to the garage it goes .. should have a years guarantee on the parts ?
|
||
29th Mar 2012 8:52pm |
|
JWL Member Since: 26 Oct 2011 Location: Hereford Posts: 3443 |
With reference to Hale and Pace; "We know a song about that don't we Johnny?"
"One, two, drip on my shoe, (Snip, snip.) Three, four, not any more!" |
||
29th Mar 2012 10:21pm |
|
bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 |
the master cylinder it was - indeedy .. all fixed, the last one was replace 27th May, so it almost lasted a year.
all drips and mess cleaned up and now mrsBPMan is an expert on driving the 300 clutchless (steady ), now the accelerator cable needs replacing .. ho hum - another job for the weekend |
||
5th Apr 2012 6:08am |
|
Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5012 |
Some LR parts are not great and I think can be Britpart or made by same firm. I heard that LR were sending many parts back with complaints as the quality was rubbish, certainly with Series 2 bit's it's generally better to refurb your original stuff than buy new. When it comes to cylinders, carbs etc it is better to get your old one refurbed Trouble is with the Defender we start off with crap Isn't there a quality product made by an independent somewhere |
||
5th Apr 2012 7:54am |
|
bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 |
entrweq master cylinders .. £10k a pop |
||
5th Apr 2012 11:30am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis