![]() | Home > Maintenance & Modifications > Door Card Fixing Kit from Masai 4x4 |
![]() ![]() |
|
|
AMBxx Member Since: 24 Jul 2016 Location: York Posts: 1066 ![]() ![]() ![]() |
Anyone used this?
https://www.masai4x4.com/Door-Card-Fixing-...p562960880 I'm tempted as I've a few missing bits. Anyone got an alternative? I only need to replace 4 or 5 so buying the full pack seems excessive. |
||
![]() |
|
shanecl Member Since: 20 Mar 2013 Location: Louth Posts: 542 ![]() ![]() ![]() |
absolute dung, screws too short. I ended up bonding them in and even at that the fir clips don't hold
|
||
![]() |
|
AMBxx Member Since: 24 Jul 2016 Location: York Posts: 1066 ![]() ![]() ![]() |
That seems pretty unanimous!
![]() |
||
![]() |
|
300TDi CSW Phil Member Since: 03 Apr 2016 Location: Bracknell Posts: 803 ![]() ![]() ![]() |
I looked at those brackets and thought some meccano strips might fit the bill possibly with the original snap sac type clips. Until I get a door apart next week I wont need to test that theory ![]() Wide Track Sankey- In bits- Gone to a new home M0XQS |
||
![]() |
|
shanecl Member Since: 20 Mar 2013 Location: Louth Posts: 542 ![]() ![]() ![]() |
I installed rivnuts and used a stainless dome Allen bolt with a stainless penny washer in areas where the clips went. looks well and definitely isn't going anywhere.
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
