![]() | Home > General & Technical (L663) > SV Dynamic |
![]() ![]() |
|
|
Down & Dirty Member Since: 15 Sep 2023 Location: Somewhere outback Posts: 81 ![]() ![]() |
![]() |
||
![]() |
|
Down & Dirty Member Since: 15 Sep 2023 Location: Somewhere outback Posts: 81 ![]() ![]() |
Colin
Not had time to look with the g4 yet but what about MultiCAN-875 SV Dynamic Mode? My 24 HSE X-Dynamic 90 Carpathian Grey |
||
![]() |
|
Colin68 Member Since: 18 Jul 2024 Location: Blackpool Posts: 114 ![]() ![]() |
I will check when back off holiday on Wednesday
|
||
![]() |
|
Colin68 Member Since: 18 Jul 2024 Location: Blackpool Posts: 114 ![]() ![]() |
Tried 875 but nothing changed.
|
||
![]() |
|
Down & Dirty Member Since: 15 Sep 2023 Location: Somewhere outback Posts: 81 ![]() ![]() |
![]() Will have another good look through my file🤔 My 24 HSE X-Dynamic 90 Carpathian Grey |
||
![]() |
|
bijan0005 Member Since: 03 Feb 2024 Location: Tashkent Posts: 3 ![]() ![]() |
You can try to change this parameters. Comparing 2 CCFs of L405 SVA and L405 this parameters have difference.
![]() Click image to enlarge ![]() Click image to enlarge ![]() Click image to enlarge |
||
![]() |
|
Mouta Member Since: 24 Mar 2025 Location: Muscat Posts: 31 ![]() ![]() |
Did you figure it out? I’ve activated Dynamic Mode using the rotary dial, configurations screen, and even got the red dials, but I’ve never seen this layout appear. |
||
![]() |
|
Colin68 Member Since: 18 Jul 2024 Location: Blackpool Posts: 114 ![]() ![]() |
After doing a bit more digging I think it is only available on V8 models
|
||
![]() |
|
Mouta Member Since: 24 Mar 2025 Location: Muscat Posts: 31 ![]() ![]() |
Thanks Colin
I did some reading here and there but couldn’t find a clear answer myself. I’ll gladly take your word for it! |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
