spacegit
Member Since: 02 Dec 2024
Location: Bay Area
Posts: 3
|
I ordered the wheel from powerfuluk and it came in a box with that part number, but he may have put the wheel into a different box before he sent it.
https://www.powerfuluk.com/collections/new...ender-l663
I did get a heated wheel though. Pretty obvious with the wires going to the rim
|
16th Mar 2025 12:20am |
|
NewDefenderUK
Member Since: 07 Dec 2021
Location: UK
Posts: 10
|
northeye wrote:Hello, long time no see.
Eventually, I contacted the GAP team because the CCF relearning operation on the TCM (Transmission Control Module) always failed.
Since I believed that the TCM was crucial in this case and many times tried and error.
They provided me with a special build of the G4 firmware, which can successfully perform CCF relearn, and the paddle shifters now work properly.
Yes, the IIDTool G4 can now enable flappy paddle shifters.
We should wait for public release of the new firmware though.
I’m so grateful to the GAP team, thanks pat.
Ive just used my GAP G4 tool to activate the paddles. It works perfectly (with the latest GAP tool firmware update) on a 2025 Defender P425 retrofitted with paddles. |
|
10th Jun 2025 4:10pm |
|
