 | Home > Puma (Tdci) > Missing door pillar trim! |
 
|
|
|
| 22900013A Member Since: 23 Dec 2010 Location: Oxfordshire Posts: 3153   
|
Mine doesn't have the covers either, but the wiring was done a bit more neatly than yours. 2011 110 USW
1973 Series III 1-Ton 1972 Series III 1-Ton Cherrypicker 1969 IIA 1-Ton 1966 IIA 88" |
||
21st May 2011 7:24pm |
|
| d j hutton Member Since: 30 Jul 2009 Location: Dorset Posts: 1044  
|
I was just thinking the same thing, so saved me asking, handy for getting some wax in though.
dj 1989 200tdi 90 csw 2011 110 usw Orkney grey Buy British 🇬🇧 Defender Clothing Designs available at http://www.rangesports.com/acatalog/Defender-Stuff.html |
||
|
11th Dec 2011 5:23pm |
|
| Happyoldgit Member Since: 14 Sep 2007 Location: Norfolk Posts: 3472 
|
Best place is via the rubber bung / grommet at the pillar base closure underneath the vehicle. Steve. Ineos Grenadier Trialmaster but owned numerous Land Rover vehicles of all shapes and sizes over the decades. Current Defender: A non tarts hand-bagged Puma 110 XS USW.. Now long gone. [Insert something impressive here such as extensive list of previous Land Rovers or examples of your prestigeous and expensive items, trinkets, houses, bikes, vehicles etc] http://forums.lr4x4.com I used to be Miserable ...but now I'm ecstatic. |
||
|
11th Dec 2011 5:29pm |
|
| T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101 
|
been thinking about this...needs a panel to cover
|
||
|
11th Dec 2011 5:56pm |
|
| d j hutton Member Since: 30 Jul 2009 Location: Dorset Posts: 1044
|
Good point as I guess it's the bottom that needs it more than the top part (must remember to mask off the holes inside so I don't fill the inside of the car as well!) I'm surprised that someone hasn't come up with a nice plastic moulding to cover the holes but probably the wiring going through would make that a bit tricky, nice to be able to see how its put together though. DJ 1989 200tdi 90 csw 2011 110 usw Orkney grey Buy British 🇬🇧 Defender Clothing Designs available at http://www.rangesports.com/acatalog/Defender-Stuff.html |
||
|
13th Dec 2011 3:46pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11327
|
I'm sure somebody will be along to offer a hugely expensive stainless steel one anytime soon
 Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
13th Dec 2011 4:15pm |
|
| d j hutton Member Since: 30 Jul 2009 Location: Dorset Posts: 1044
|
That't a nice idea, who could possibly make such a thing  1989 200tdi 90 csw
2011 110 usw Orkney grey Buy British 🇬🇧 Defender Clothing Designs available at http://www.rangesports.com/acatalog/Defender-Stuff.html |
||
|
13th Dec 2011 6:02pm |
|
| Grockle Member Since: 24 Nov 2008 Location: Peak District National Park Posts: 2266 
|
'ere Zag, has the tyre pressure decal got a part no on it? if so let me have it please :thumbsup: Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  2.4 90 XS
1968 1/32 scale Britains 109 Pick up. |
||
|
13th Dec 2011 6:32pm |
|
Nice to see the Dinitrol extension nozzle did it's stuff - all over the seats, good job I had the cheapo Tesco £1.50 covers on.... Would have been easier to spray from the inside if I had known there was access 
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5026
|
I'll go and have a butchers hook!
Says BH12-1532-BA at the bottom, no other numbers! |
||
|
13th Dec 2011 6:35pm |
|
| Rosco Member Since: 03 Dec 2010 Location: Burntwood Posts: 1876 
|
I'm guessing this is a 110 only issue as never spotted that on my 90.
But then I've seen the tyre pressure decal either so I could have had my eyes closed for 4 years  2007 - Stornoway Grey 90 XS SW - Gone
2002 - Black Discovery II - Gone 2014 - Montalcino Red 110 XS SW |
||
|
24th Dec 2011 12:42am |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
