↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > 2011 Defender 2.4 Puma cranks but will not fire.
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
Ianh



Member Since: 17 Sep 2018
Location: Essex
Posts: 2544
United Kingdom 
Glad it’s solved.
However , just for clarity, that’s not an issue with the immobiliser, I.e the 10AS. It’s an issue with the immobilisation circuit between the 10AS and the engine ECU. On the 2.4 the single wire goes via the instrument cluster (IC) and within the IC the PCP solder connections can fail, breaking the circuit between the 10AS and engine ECU. As you rightly say this was addressed in the 2.2 Puma’s where the wire does not go via the IC.
Post #1029837 30th Mar 2024 2:13pm
View user's profile Send private message View poster's gallery Reply with quote
Sparke



Member Since: 29 Dec 2017
Location: Bishop Auckland
Posts: 2
United Kingdom 2011 Defender 110 Puma 2.4 HT Alpine White
Thanks for the reply Graham, I am thinking mine is the high pressure fuel pump and sensors. Deep Joy.
Post #1030805 7th Apr 2024 8:11am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums