DEFENDER2.NET - View topic - Focal V2 speaker install questions

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Focal V2 speaker install questions

Page 1 of 1

Print this entire topic ·

mcma1

Member Since: 16 Oct 2012
Location: Northern Ireland
Posts: 2872

Focal V2 speaker install questions

I have read a few threads about installing these with the cross overs but just to confirm is it ok to use the existing speaker wires to power the cross over and then what wire should I use from the cross over to the speaker and tweeter? Audio isn’t really my thing

Andy

2014 Fuji 110 SW LS3
https://www.defender2.net/forum/post751233.html#751233

2014 Corris 110 SW
http://www.defender2.net/forum/topic40056.html

My old Xtech 90 build..
http://www.defender2.net/forum/topic15681.html

LS3 V8 build...
http://www.defender2.net/forum/topic49051.html

19th Nov 2023 5:47pm

barbel jim

Member Since: 12 Dec 2012
Location: Northants
Posts: 1411

That’s the correct way. The tweeters should be prewired. Any speaker cable will do for the main cone. The cross over will be marked, so wiring is pretty straight forward. I can’t remember how the puma is wired, sold my 2.2 good few years ago, but they had tweeters fitted, I just can’t remember where the cross over is, or if it even had one??

19th Nov 2023 10:13pm

mcma1

Member Since: 16 Oct 2012
Location: Northern Ireland
Posts: 2872

Just had a look at this, so there are two wires to each of the main speaker connectors, and I assume one from each goes up to the tweeter? Do I connect all 4 to the cross over?? Andy

2014 Fuji 110 SW LS3
https://www.defender2.net/forum/post751233.html#751233

2014 Corris 110 SW
http://www.defender2.net/forum/topic40056.html

My old Xtech 90 build..
http://www.defender2.net/forum/topic15681.html

LS3 V8 build...
http://www.defender2.net/forum/topic49051.html

23rd Nov 2023 8:37pm

barbel jim

Member Since: 12 Dec 2012
Location: Northants
Posts: 1411

Basically yes. The crossover will be marked input, tweeter and mid. So find which 2 are connected to the tweeter, attach a string line to them so you can pull it up when you remove the tweeter, attache the new tweeter wire and pull down. Then connect the other 2 wires to the input on the crossover. New wire to the mid and away you go

23rd Nov 2023 9:12pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6485

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

The factory tweeters have their crossover/filter built in, so they are simply piggybacked off the main speaker.

To use crossovers, easiest to take the factory wires to the main speaker and use those as the input to the crossover.

New wires from crossover to mid speaker, new wires from crossover to tweeter.

Tape up the now unused factory tweeter plug somewhere safe for the future if you return to standard.

1988 90 Td5 NAS soft top

2015 D90 XS SW

23rd Nov 2023 9:46pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum