Member Since: 16 Nov 2023
Location: Brighton
Posts: 1
Crank but won’t start
I’ve started putting in a secret switch to a activate the full pump got most of the relay wired up but was looking for a suitable ignition live and instead of just using the bloody radio wire I accidentally cut into th yellow block connector behind the radio. I cut a thin white with green trace wire and now the car will not crank and not start. Found the starter relay and put a test light on the black with orange trace wire on the back of the relay plug and onto an earth, the car now cranks but that’s all.
I soldered the original white and green trace wire back together and she now cranks but again won’t start. I e checked for continuity down the crank sensor wires to the ECU plug and they’re ok as I know they have a tendency to brake. Can anyone help me as I’m pulling what little hair I have left out. I’m hoping I’ve not up the ECU.
Thanks in advance for any help given
16th Nov 2023 10:31pm
jim4244
Member Since: 13 Apr 2014
Location: Bedfordshire
Posts: 641
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
up the ECU.
17th Nov 2023 4:30am
