Webasto Bench Test |
 |
| TITLE |
+ |
- |
| FILE NAME |
+ |
- |
| DATE |
+ |
- |
|
|
Webasto Bench test setup – 1340 views
|
|
Thermo Top Wiring Loom Connections – 1318 viewsPic showing top of the unit with the wiring cover in place. You can see the only two connectors showing are the ones from the wiring loom
|
|
Thermo Top C Main unit – 1189 viewsPic showing the main unit - you can jsut see the coolant pump (round black with white sticker on top) Inlet to the pump is the clear reinforced tube at the bottom. Outlet from the heater is top tube.
|
|
Webasto Timer, intake and exhaust – 1193 views
|
|
Webasto Thermo Top C on bench – 1525 viewsThis pic shows the main components of the Webasto set up for testing purposes on the bench. In the centre you can see the main heater unit. The silver tube from the bottom of the unit is the exhaust and the silver tube coming out at right angles from the left hand side is the air intake. Also on the left hand side is the oval 1533 timer. The two clear pipes (19mm inside diam) going into the yellow bucket are the water pipes connected to the coolant pump. Note: this plastic tube used here is only for testing
|
|
Thermo Top C wiring connections – 1632 viewsStarting from left to right. Water pump, Heater fan, Heater glowplug (these three normally sit under a plastic cover), main power in (from wiring loom), 6 pin connector (from wiring loom)
|
|
Webasto fuse unit – 1484 viewsMain fuse block (part of wiring loom) and relay for the car heater fan wires.
|
|
Fuel Pump connection – 1263 viewsPic shoing the connector (from the Webasto wiring loom) to the Webasto fuel pump. The waterproof rubber gaiter has been pulled back to show the blue and brown wires and the metal cip on the plug is missing in this pic. Blue and brown wires can be fitted either way round
|
|
Rear view of Webasto 1533 oval timer – 1259 viewsPic showing the rear of the 1533 timer and the square connector from the wiring loom
|
|
|
|
|
|
|
