Mantec |
 |
| TITLE |
+ |
- |
| FILE NAME |
+ |
- |
| DATE |
+ |
- |
|
|
1534 views
|
|
Pull the vent off the wing horizontaly – 1557 views
|
|
1676 views
|
|
This side goes against the raised air intake body – 1678 views
|
|
The 8 bolts look the same but on closer inspection you will find that 3 have a larger hex hole in the head – 1725 views
|
|
Top bracked fixed to intake body with 3 allen serews – 1891 views
|
|
Hook tabs into the wing and push down – 1902 views
|
|
Making sure its located proper like – 1971 views
|
|
Marking the top holes – 1811 views
|
|
Marking lower fixing holes, Ensure the air intake is correctly positioned – 1861 views
|
|
Top holes marked and ready for drilling. The screen surround it ally and quite thick – 1912 views
|
|
Drilling the top holes we used 5mmŲ and the black bolts cut in OK. Mantec suggest a 5.5mmŲ – 1826 views
|
|
Drill 2 x 9mmŲ holes for the captive nuts Dont forget to paint the exposed metal – 1962 views
|
|
The 2 black self tapping bolts. screw these in to cut the thread before you fit the intake – 1791 views
|
|
Fitting the lower fixing bolts into the rivenuts – 1759 views
|
|
Fitting the top bracket – 1837 views
|
|
|
|
