↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > fitting an internal single hoop roll cage in a D90
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Monmouth



Member Since: 27 Nov 2013
Location: Gwynedd
Posts: 45

Wales 1990 Defender 90 300 Tdi SW Firenze Red
fitting an internal single hoop roll cage in a D90
I've got a hoop to install in my 90, will i need to remove the roof from my station wagon to enable the fitting? 1990 Defender 300TDi
Post #367900 29th Oct 2014 1:17am
View user's profile Send private message View poster's gallery Reply with quote
diesel_jim



Member Since: 13 Oct 2008
Location: hiding
Posts: 6037

United Kingdom 2006 Defender 110 Td5 SW Epsom Green
Depends on how big it is.....

And how long the legs are, if it has spacers between the bar and the inside of the roof, all sorts of things.
Post #367998 29th Oct 2014 1:01pm
View user's profile Send private message View poster's gallery Reply with quote
davew



Member Since: 02 Jan 2012
Location: North Yorkshire
Posts: 888

England 1990 Defender 90 V8 Petrol PU Auto Rioja Red
Probably... it depends on the design, as above.

IF you can't do it without then bear in mind that you don't need to unbolt the roof as such. It's simpler to unbolt the windscreen hinges (if you have proper windscreen hinges, even better, you just need to undo the stay bolts), unbolt the bottom of the rear sides form the back body (a few nuts on each side - 3 in most cases) and then you can simply lift the rear of the roof a few inches in one piece complete with headlining and trim. A block of wood at each side to support it and you can fit the hoop then lower it back down again.

That way you don't have to break the seal between the windscreen and roof and don't have to remove the headlining. If you don't have "proper" hinges at the bottom of the windscreen, make sure it doesn't slide forwards off the bulkhead when you lift it at the back. http://www.yorkshireoffroadclub.net/
Post #368026 29th Oct 2014 3:19pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums