DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > Peeved Off

Page 1 of 1

Print this entire topic ·

cornish rattler

Member Since: 31 Aug 2013
Location: Manchester
Posts: 642

1988 Defender 90 200 Tdi CSW Bronze Green

Peeved Off

Thought i was going to be rebuilding my front axle not this weekend but next weekend but today my clutch decided to let go instead, master cylinder empty with fluid all over the floor and supposedly stuck in reverse ( son went to use it and all this happened ) lookerly it was on the drive when all this happened so i will go round and have a look and see whats up in the morning before i go to work

Graham

1988 Defender 90 county 200tdi ( Beast )

Paul Walker 1973-2013
( I Almost Had You )

9th Sep 2014 11:28pm

shaggydog

Member Since: 12 Aug 2012
Location: Kent
Posts: 3346

1991 Defender 110 200 Tdi USW Arles Blue

Be heartened, a clutch master cylinder is very easy to sort out and won't cost the earth.

Just make sure it is properly adjusted once rebuilt or you will have same issues I had

9th Sep 2014 11:39pm

cornish rattler

Member Since: 31 Aug 2013
Location: Manchester
Posts: 642

Yeah i am just unsure why son is saying its stuck in reverse but really hoping its just the slave cylinder as was going to do all this when i do the galv chassis up re-build early next year

Graham

1988 Defender 90 county 200tdi ( Beast )

Paul Walker 1973-2013
( I Almost Had You )

10th Sep 2014 12:23am

cornish rattler

Member Since: 31 Aug 2013
Location: Manchester
Posts: 642

Its just the slave cyl that's gone so i will replace both the master and slave together ordering parts today so hopefully should get it done over the weekend oh and its not stuck in gear either

Graham

1988 Defender 90 county 200tdi ( Beast )

Paul Walker 1973-2013
( I Almost Had You )

10th Sep 2014 11:54am

cornish rattler

Member Since: 31 Aug 2013
Location: Manchester
Posts: 642

On the bright side if the weather is crap over the weekend i can now get the 90 into the garage now

Graham

1988 Defender 90 county 200tdi ( Beast )

Paul Walker 1973-2013
( I Almost Had You )

10th Sep 2014 11:45pm

Tiger

Member Since: 06 Jul 2012
Location: Wales
Posts: 2265

Master is easy, if a bit time consuming.

Slave is a sod of a job!!! Getting that little plastic clip and the push rod behind it if it comes off is a total grrrrr of a job.

Gunsons bleed kit is highly recommended also!

http://www.halfords.com/motoring/garage-eq...-eezibleed

11th Sep 2014 11:10am

shaggydog

Member Since: 12 Aug 2012
Location: Kent
Posts: 3346

^^ +1

11th Sep 2014 12:46pm

Dave T

Member Since: 07 Jun 2013
Location: Glasgow
Posts: 487

take great care taking the slave of, slowly and gently, it is a mother of a job getting that rod and plastic clip back in. 2015 RRS Autobiography SDV6
1994 Def 90 300tdi

11th Sep 2014 12:51pm

cornish rattler

Member Since: 31 Aug 2013
Location: Manchester
Posts: 642

Sorry not been on for a bit ( internet prob's ) but sorted no, anyway sorted my clutch problem i had a couple of weeks ago and replaced both master and slave cylinder's and everything is ok again

Graham

1988 Defender 90 county 200tdi ( Beast )

Paul Walker 1973-2013
( I Almost Had You )

23rd Sep 2014 11:37am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum