DEFENDER2.NET - View topic - Truck cab rear window replacement

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Truck cab rear window replacement

Page 2 of 2

Print this entire topic ·

PocketFred

Member Since: 02 Feb 2022
Location: Lausanne
Posts: 22

2001 Defender 110 Td5 HT Caledonian Blue

Do you have a link to that thread ?

Because the part numbers say otherwise: Pickups and RH side windows of HTs are LR044315
(and LR044316 for the LH side).

The HTs and pickups both have 905 mm x 365 mm/ 70 mm radius window openings.

=/= to 90/110 SWs that have 1055 mm x 425 mm ones. 110 HT TD5 w/ PopTop for travelling
110 CSW 300tdi for hunting

4th Feb 2022 10:07am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 16894

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

PocketFred, that is extremely interesting.

I was going on what was posted before (I can't readily find the thread unfortunately) which was that the rear window in a TC/DC was not the same size as the side windows in an SW, but it is of course only hearsay. If the part numbers are the same it would be hard to argue that the windows are different sizes.

If they are the same it opens up a range of possibilities since any of the gull-wing windows or doors which fit HT side standard apertures should fit the TC/DC.

Since I only have a DC I can't compare the measurements, but if someone was willing to measure their SW windows I would be happy to measure my DC window.

Postscript: I see from Googling that part number that you are absolutely right, many suppliers list it as both side window and rear window.

You learn something new everyday, I'm very grateful to you!

4th Feb 2022 11:19am

Roy5695

Member Since: 15 Feb 2014
Location: Cornwall
Posts: 1123

2011 Defender 110 Puma 2.2 XS DCPU Indus Silver

I was always lead to believe that truck cab windows were different sizes 🤔🤔 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html

Instagram - @r22oyp

Roy

4th Feb 2022 2:20pm

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3213

2012 Defender 90 Puma 2.2 CSW Santorini Black

blackwolf wrote:

Since I only have a DC I can't compare the measurements, but if someone was willing to measure their SW windows I would be happy to measure my DC window.

Measured my Puma 90, just shy of 1090x460mm. That is including window frame, not hole opening, which I cannot measure without taking the trim off.

I believe the Td5 and earlier ones that are riveted, not bonded, have a slightly narrower frame section, but window opening except radius is the same. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

4th Feb 2022 3:55pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11240

2013 Defender 110 Puma 2.2 USW Orkney Grey

I suspect that Fred is talking about the windows used in the sides of ROW spec hardtops, which don't really register over here. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

4th Feb 2022 5:39pm

Page 2 of 2

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum