↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Fan / Clutch Part Number Question
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
MGRGPGBG



Member Since: 19 Dec 2017
Location: New York
Posts: 67
United States 2009 Defender 110 Puma 2.4 SW Alpine White
Fan / Clutch Part Number Question
I am trying to figure out which Part Number is the correct one I need for the radiator fan / Clutch assembly? I found PGG500340 and LR029997 - not sure how to tell which one I need since I do not have a chassis number associated with my 2.4 since I bought it second hand. The reference page I found with the two part numbers just differentiates by the VIN Number range. - thanks in advance.

Side note - need to test the fan clutch to confirm it is bad as I expect. What is the best way to test this? It is brutally cold here and I believe the fan is running constantly as my engine temperature is dropping at idle and only maintains on the highway.

- Mark
Post #937543 13th Jan 2022 4:19pm
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3209
Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
Check out this post.. I think you are not alone.
https://www.defender2.net/forum/topic71379...emperature 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #937546 13th Jan 2022 4:33pm
View user's profile Send private message View poster's gallery Reply with quote
MGRGPGBG



Member Since: 19 Dec 2017
Location: New York
Posts: 67
United States 2009 Defender 110 Puma 2.4 SW Alpine White
Thank you
Post #937553 13th Jan 2022 5:03pm
View user's profile Send private message View poster's gallery Reply with quote
hank



Member Since: 12 Sep 2016
Location: South Wales
Posts: 2231
Wales 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
I see that you are now sorted, however you should find the VIN number on a plate in the bottom corner of the windscreen, as well as stamped into the chassis leg. > 110 XS Double Cab
> Instagram @simonlanemind
Post #937560 13th Jan 2022 5:43pm
View user's profile Send private message View poster's gallery Reply with quote
MGRGPGBG



Member Since: 19 Dec 2017
Location: New York
Posts: 67
United States 2009 Defender 110 Puma 2.4 SW Alpine White
Hank - This engine came out of another truck. I do not have a VIN from it as I bought it as a stand alone engine/tansmission that I put into my 1995 chassis and body.
Post #937561 13th Jan 2022 5:51pm
View user's profile Send private message View poster's gallery Reply with quote
MGRGPGBG



Member Since: 19 Dec 2017
Location: New York
Posts: 67
United States 2009 Defender 110 Puma 2.4 SW Alpine White
Dinnu wrote:
Check out this post.. I think you are not alone.
https://www.defender2.net/forum/topic71379...emperature



Thank you for this link. From this I was able to see / test that the fan clutch is not engaging at startup and cold start. Embarrassed to also say that I did not see the part number molded into the fan blade when I was looking at this in the dark the other night. Today as it is warmer I pulled the shroud and see the part number on there now.

So seems that all is working mechanically and that possibly the cause is that I have over sized Allisport aluminum radiator and intercooler.

Thanks again!
Post #937568 13th Jan 2022 6:27pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums