DEFENDER2.NET - View topic - Help with wiring diagram for an Aux socket

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Help with wiring diagram for an Aux socket

Page 1 of 1

Print this entire topic ·

Stacey007

Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3741

Help with wiring diagram for an Aux socket

Hello

This is for my Series III

I have a panel I would like to put a volt meter (2 wires) and a usb charger (2 wires)

Also I would like to be able to switch it off so not on with ignition.

I've put a pair of wires to the battery direct and into cab in the dashboard area.

How do I wire this to a switch. Then the volt meter / usb.

I also have an online fuse I can add.

Ideally a simple as you can sketch please if anyone can help as I'm not keen on electrics....

This is what I have.

Click image to enlarge

Click image to enlarge

Thanks 👍

28th May 2019 3:45pm

boxoftricks

Member Since: 06 Feb 2019
Location: Home Counties
Posts: 747

2011 Defender 110 Puma 2.4 USW Zermatt Silver

The positive wire from the battery should have the inline fuse wired in as close to the battery as you can.

Then from the fuse the wire needs to be crimped into one of the red connectors on the switch. You then crimp the live wire from the volt meter and sockets into the other red connector.

The negative wires from the meter and socket can be joined together and connected to the negative wire from the battery.

28th May 2019 4:56pm

IGP

Member Since: 05 Feb 2019
Location: Caverswall
Posts: 28

If you want the connection to last I would replace the crimp connectors with normal spade connectors and solder the joint. Have used the crimp connectors before and the wire often works loose.

Cheers

Ivan

29th May 2019 7:53am

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

Hi Stacey. Do you want the volt gauge to be on at the same time as the USB ports are active or separately?

With that switch you could have either;

1) USB charger and volt gauge on, or
2) USB changer on or volt gauge on.

Looks as if you have a double pole double throw switch there so either of the above is possible.

Wiring diagram attached.

Click image to enlarge

30th May 2019 1:43pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum