DEFENDER2.NET - View topic - Advice please, installing a sub to standard XS alpine radio

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Advice please, installing a sub to standard XS alpine radio

Page 1 of 1

Print this entire topic ·

Jimbob

Member Since: 17 Mar 2011
Location: Gower
Posts: 68

2015 Defender 90 Puma 2.2 HT Corris Grey

Advice please, installing a sub to standard XS alpine radio

Hi can anyone offer advice, I've installed a sub to my 15 plate XS with the alpine head unit. I couldn't find a way of tapping into the blue/white wire for the remote turn on feed so I've just attached it to a switchable live off the 12v plug socket. Now when I turn the car on I get a loud pop from the sub, I'm told it's because the amp is getting power before the head unit is and I need to fit a remote turn on delay, I've found these on eBay but there's no clear instructions, are they fairly straight forward to fit? Or is there a better way? My knowledge of what to do ran out after the basic install unfortunately lol! Thanks! 2009 Defender County Hard Top (gone 😞)
1990 200tdi defender off roader
2015 Defender XS Hard Top (awaiting delivery 😄)

10th Jun 2017 4:31pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769

Can you not just use the remote wire on the back of the headunit? If you have no other ice I can't see why it would be used already. Ray
My build thread
http://www.defender2.net/forum/topic17615.html

10th Jun 2017 7:12pm

Jimbob

Member Since: 17 Mar 2011
Location: Gower
Posts: 68

There wasn't one there weirdly! The blue/white wire which is amp remote/aerial raise according to the schematic was only going into the head unit in the block connector, no loose end or other connection there, I can only presume it's part of the factory wiring, and I'd have to tap into it which there wasn't enough room to do so? 2009 Defender County Hard Top (gone 😞)
1990 200tdi defender off roader
2015 Defender XS Hard Top (awaiting delivery 😄)

10th Jun 2017 8:21pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769

What do you mean by tap into it? The wire should come out of the plug in the back of the headunit and maybe run into a multi plug then usually out the other side to nothing. Ray
My build thread
http://www.defender2.net/forum/topic17615.html

10th Jun 2017 11:43pm

Jimbob

Member Since: 17 Mar 2011
Location: Gower
Posts: 68

Yeah for some reason it goes into the block but doesn't come back out? There's no loose end to connect to like normal

2009 Defender County Hard Top (gone 😞)
1990 200tdi defender off roader
2015 Defender XS Hard Top (awaiting delivery 😄)

11th Jun 2017 9:23pm

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769

If it goes into the block then just cut it and put a terminal on. Ray
My build thread
http://www.defender2.net/forum/topic17615.html

11th Jun 2017 11:11pm

Jimbob

Member Since: 17 Mar 2011
Location: Gower
Posts: 68

It's just suddenly dawned on me why it's connected, would there be the plug under the cubby box for the extra Sub option? I thought this wasn't available on the 90 only the 110 or could it be there? I'll check when I have chance 2009 Defender County Hard Top (gone 😞)
1990 200tdi defender off roader
2015 Defender XS Hard Top (awaiting delivery 😄)

15th Jun 2017 8:42pm

glpinxit

Member Since: 31 Jul 2010
Location: Somerset
Posts: 149

No plug in my MY14 90 XS so had to wire from scratch. Cheers, Guy.

22nd Jun 2017 9:32pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum