 | Home > Td5 > Black sheep can't do Td5 cross member |
 
|
|
|
| sako243 Member Since: 08 Jul 2014 Location: Wales Posts: 1188   
|
I'll post up photos this weekend but I'm having a custom one similar to Black Sheep's fabbed up as we speak. I'm going to see it tomorrow AM before it's welded on.
Haven't seen it yet but Chris is a superb fabricator and might be willing to do more of them but said sales have to go through me as he can't be bothered! Mine's a 300Tdi 110 but he's just been building it as he goes. Ed 82 Hotspur Sandringham 6x6 95 Defender 110 300Tdi |
||
9th Sep 2016 7:00pm |
|
| Romadog Member Since: 07 Jul 2011 Location: Powys Posts: 1746 |
Replacement Chassis Parts
https://www.facebook.com/Replacement-Chass...760673497/ |
||
|
9th Sep 2016 8:07pm |
|
| Daisy90 Member Since: 01 Feb 2015 Location: Hampshire Posts: 843  
|
Daisy is looking more like she needs one soon
May have to pop a few patches on it for the mot in a couple of weeks time Looking forward to seing yours though  |
||
|
9th Sep 2016 8:43pm |
|
| sako243 Member Since: 08 Jul 2014 Location: Wales Posts: 1188
|
Some teasers, popped in to see it today before Lucas welds it onto the chassis.
All 5mm but with some strengthening plates for the towbar area. We're only drilling the necessary holes so less areas for rust to attack.  Click image to enlarge Click image to enlarge Ed 82 Hotspur Sandringham 6x6 95 Defender 110 300Tdi |
||
|
10th Sep 2016 9:40am |
|
| excossack Member Since: 22 Feb 2012 Location: North West Posts: 5743 
|
When I got my Blacksheep x-member I got a plate made up with 6 captive nuts to sit behind the tow bar mount so I can replace the towing setup without having to fiddle about trying to get nuts up behind the x-member for the bolts. 1999 Defender TD5 110
Regards John M0VAZ Econet Station 48 no clock |
||
|
10th Sep 2016 11:29am |
|
| miker Member Since: 13 Sep 2015 Location: Surrey Posts: 1758 
|
Recently Clive did start doing a nut plate, unfortunately it seems that he no longer does any of it!
|
||
|
10th Sep 2016 1:41pm |
|
| sako243 Member Since: 08 Jul 2014 Location: Wales Posts: 1188
|
@plumpmoose
If you fancied a cross member like the one I've just had done then I'd be more than to arrange something for you? Mine's a 300Tdi 110 but the rear should be the same. I'd imagine mounts and potentially fuel bracket are different? It's difficult to say but from the prices I've seen from Black Sheep then this would be comparable. I had a bigger bill because although I dropped the tank and electrics for them they still did the removal of the old one. In summary everything 5mm steel with reinforcement for the tow bracket. They could quite happily weld the nuts in place for the tow bar if that's what you wanted. In fact anything is possible. Ed 82 Hotspur Sandringham 6x6 95 Defender 110 300Tdi |
||
|
10th Sep 2016 3:11pm |
|
| sako243 Member Since: 08 Jul 2014 Location: Wales Posts: 1188
|
Forgot photo of it on the vehicle.
Click image to enlarge Ed 82 Hotspur Sandringham 6x6 95 Defender 110 300Tdi |
||
|
10th Sep 2016 3:12pm |
|
| plumpmoose Member Since: 14 Dec 2015 Location: North Devon & Oxon Posts: 114
|
Exploring the local option atm, but let me have the details. Is there a way to design out all the places that mud and damp like to reside? Only really need the box bit to hang the mudflaps. No need for the other 'enclosed' areas. |
||
|
10th Sep 2016 6:41pm |
|
| Daisy90 Member Since: 01 Feb 2015 Location: Hampshire Posts: 843
|
Hope they haven't made that orange strap grubby
Looking good and useful |
||
|
10th Sep 2016 7:41pm |
|
| sako243 Member Since: 08 Jul 2014 Location: Wales Posts: 1188
|
What I've designed has a couple of less places than the Black Sheep Ones I've seen. It's a purely open back (or front depending on how you look at it). The BS one appeared to have plates in the corner which I've removed, the reinforcing brackets for the seats in my CSW I was planning on simply bolting straight through, although have some box section to act as spacers if I need them. Only holes that have been drilled are for the tow bar and soon a couple more for the corner brackets / wheel carrier. I'll try and get some decent photos of the guts of it tomorrow. Ed 82 Hotspur Sandringham 6x6 95 Defender 110 300Tdi |
||
|
11th Sep 2016 1:10am |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
