DEFENDER2.NET - View topic - J&E Engineering

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > J&E Engineering

Page 1 of 1

Print this entire topic ·

Mr Baldylocks

Member Since: 15 Jul 2010
Location: Nearer my home than yours.
Posts: 487

J&E Engineering

Morning Guys and Girls, has anyone had experience of a Stage 1 Remap from these guys, also their suspension option to make the old 90 handle better? I'd appreciate your thoughts. Cheers Life is one big adventure, that's why we have the vehicle for the journey.

24th Oct 2010 9:57am

Billy

Member Since: 18 Oct 2010
Location: Harpenden
Posts: 2

Yeah, got a 1st stage about a month ago. They've got a cheap offer on at the moment

I heard loads of good feedback from them and I was poised with a few questions...

I mentioned to the guy with the laptop that I was going to decat my 90 and the EGR had been removed, so was there a specific tweak that would best match this setup?

"Look, I just plug the laptop in, look under the bonnet and everyone gets the same."

I didn't feel like a unique customer, like all the reviews I was reading.

I'm not saying it was a bad tune though, my 90 goes like the nuts now!

24th Oct 2010 10:25pm

Mr Baldylocks

Member Since: 15 Jul 2010
Location: Nearer my home than yours.
Posts: 487

Brilliant, cheers Billy. I've got the usual decat, no centre silencer and free flow filter so fingers crossed it should go quite well. Any news on the suspension? Life is one big adventure, that's why we have the vehicle for the journey.

24th Oct 2010 10:59pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6041

I'd give Ian at IRB a shout. much more customer friendly.

25th Oct 2010 7:56am

nosnibod

Member Since: 15 Aug 2007
Location: West Midlands
Posts: 365

2015 Defender 110 Puma 2.2 XS CSW Corris Grey

diesel_jim wrote:
I'd give Ian at IRB a shout. much more customer friendly.

I'd agree with that. Ian will also take account of your vehicles setup and check that it's in fine health before he remaps it. Dave
Gracie - 2015 110 XS County Station Wagon

25th Oct 2010 9:44am

Steve B

Member Since: 22 May 2009
Location: Warwickshire
Posts: 586

Billy wrote:
Yeah, got a 1st stage about a month ago. They've got a cheap offer on at the moment

I heard loads of good feedback from them and I was poised with a few questions...

I mentioned to the guy with the laptop that I was going to decat my 90 and the EGR had been removed, so was there a specific tweak that would best match this setup?

"Look, I just plug the laptop in, look under the bonnet and everyone gets the same."

I didn't feel like a unique customer, like all the reviews I was reading.

I'm not saying it was a bad tune though, my 90 goes like the nuts now!

If he had spoken to me like that then I would have left it.

Last edited by Steve B on 17th Jan 2011 7:00pm. Edited 1 time in total

25th Oct 2010 1:30pm

Alex e

Member Since: 23 Apr 2007
Location: Home isn't it
Posts: 204

2006 Defender 110 Td5 DCPU Zambezi Silver

I had my old one done with them and found the tune was great, didn't have any bad service from them, just waited in reception whilst they did it.....

whilst we all like to personalise our LR's, is there really much difference between them mechanically? it's not like their finely tuned race cars and every tweek makes a massive difference.... i would prefer to have a slightly worse service from a widely known company than a one man band custom made install. (i'm not saying IRB or anyone else should be avoided, just my opinion on tunes in general).

25th Oct 2010 1:40pm

CarMan

Member Since: 29 Nov 2010
Location: Cotswolds
Posts: 1782

I am new around here, but not to Defenders - so hi.

I had a chip done by them a couple of years ago for the resons mentioned - special offer and 'image' I guess.

It did produce more power for sure, but I felt it didn't improve low down torque but certainly flew when the turbo got going!

As I drove away I had some surging so took it straight back, but later fixed myself a sticking wastegate which cured the problem.

It was good for money, but imho opinion - not perfect.

29th Nov 2010 9:35pm

kzycnn

Member Since: 24 Apr 2009
Location: Northumberland
Posts: 276

I had my Defender remapped by BAS. This replaced a plug-in SteinBauer unit that the previous owner had installed.

I got personal attention and a tune that suited what I wanted, what suited the car and how I would drive it - far better than sitting and waiting, in my opinion.

I would certainly recommend either BAS or IRB.

Tony

13th Dec 2010 2:51pm

T1G UP

Member Since: 08 Dec 2009
Location: Bath
Posts: 3101

2011 Defender 110 Puma 2.4 XS CSW Orkney Grey

talking of je engineering...anyone plucked up enough courage to ask how much a 2.8 L td5 bottom end is?

fancy a group buy

14th Dec 2010 9:27pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum