↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Intercooler hose went POP
Post Reply  Down to end
Page 2 of 3 <123>
Print this entire topic · 
ronwong



Member Since: 28 Jun 2012
Location: Singapore
Posts: 120

2012 Defender 110 Puma 2.2 SW Orkney Grey
My my2012 came with the 2 elbows and metal centre piece, the rubber elbows were bad and pops, which i changed to alisport silicons and the setup works a dream, till they did the q360 and changed to the all flexible pipe and i start to get q2263 all the time. So yeah i am thinking to swappng back.
Post #450570 30th Aug 2015 12:24pm
View user's profile Send private message View poster's gallery Reply with quote
Ecco



Member Since: 31 Oct 2015
Location: Kuala Lumpur
Posts: 279

Malaysia 2014 Defender 110 Puma 2.2 DCPU Galway Green
Hello and good day to everybody..this is my first post here, but unfortunate one..sigh..

..just 40 minutes ago, it seems I have got same as mentioned here..i was just on the traffic light and driving back home (i was alone in the car, so car was not overweight or something), uphill and suddenly very loud hissing noise came followed by loss of power and yellow engine light on dashboard turned on..this is brand new Defender (2014) with only 20k km on the clock..sigh..i never had defender before, and i was very happy to get brand new one, and now this..can you guys show me on several pics, if you have, where are those hoses so i can go and check myself before i call land Rover, just to see, is something fell off or blown away, because i really dont know where they are located and i do not want to touch/unscrew anything because car is under warranty..i just wanna see are those hoses you guys talking about, culprit here..thank you very much..
Post #468002 31st Oct 2015 5:39am
View user's profile Send private message View poster's gallery Reply with quote
ericvv



Member Since: 02 Jun 2011
Location: Near the Jet d'Eau
Posts: 5816

Switzerland 2009 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black
Post #468007 31st Oct 2015 7:59am
View user's profile Send private message View poster's gallery Reply with quote
bpman



Member Since: 21 May 2008
Location: Oslo
Posts: 8069

2008 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black
These are ENTREQ.DE stainless pipes and fittings, together with my recommended jubilee clips (other pipes available)



Click image to enlarge


Last edited by bpman on 31st Oct 2015 12:45pm. Edited 1 time in total
Post #468008 31st Oct 2015 8:11am
View user's profile Send private message View poster's gallery Reply with quote
tookaphotoof



Member Since: 18 Mar 2013
Location: dordrecht
Posts: 1279

Netherlands 2013 Defender 130 Puma 2.2 HCPU Santorini Black
If you have warranty, just call them. Let them pick it up and fix it for you.
Post #468010 31st Oct 2015 8:20am
View user's profile Send private message View poster's gallery Reply with quote
Ecco



Member Since: 31 Oct 2015
Location: Kuala Lumpur
Posts: 279

Malaysia 2014 Defender 110 Puma 2.2 DCPU Galway Green
..yes..car is under warranty next 5 years or 300K km, whichever comes first..but i still wanted to see myself those hoses and where they are as i have no clue where to look at..just for sake of self education and to see myself..
Post #468012 31st Oct 2015 8:22am
View user's profile Send private message View poster's gallery Reply with quote
bpman



Member Since: 21 May 2008
Location: Oslo
Posts: 8069

2008 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black
^^^ or if you value your truck fix it yourself properly Thumbs Up
Post #468013 31st Oct 2015 8:22am
View user's profile Send private message View poster's gallery Reply with quote
Deafdog



Member Since: 13 Sep 2015
Location: Northern Rivers NSW
Posts: 20

Australia 
Hi Ecco

If you stand at the right side of the Defender, in the middle of the wheel arch roughly, with the bonnet open.

Look down into the engine and look for the alternator.

It will have a pulley and belt on the side facing front and a black rubber boot over the wire at the back.

Just behind and below the alternator you will see a hose disconnected from the turbo.

If it keeps blowing off, or you want to fix it yourself use two clamps, it shouldn't blow off with two clamps.

Regards
Deafdog
Post #468030 31st Oct 2015 9:56am
View user's profile Send private message View poster's gallery Reply with quote
captain slow



Member Since: 22 Jun 2011
Location: Herts
Posts: 355

United Kingdom 2014 Defender 110 Puma 2.2 CSW Corris Grey
ericvv wrote:
Here is the perfect solution. These are for a Puma 2.4, but believe they now exist for 2.2 also.


Click image to enlarge


Hi Eric,

those look superb - can I ask where they came from? cheers 2.2 Tdci 110 XS CSW Corris Grey
Prince Harry's D3 (gone but not forgotten)
300 Tdi 110 CSW (gone but not forgotten)
Post #468033 31st Oct 2015 10:10am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
K9F



Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610

United Kingdom 2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey

Click image to enlarge


Click image to enlarge


2.2 is available. Intercooler and stainless steel pipes are the same I have fitted, the intercooler made by a company called Chiptech in Austria they can be bought from Alive. Thumbs Up

http://www.alivetuning.com/product/alive-u...tercooler/ If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!
Post #468036 31st Oct 2015 10:28am
View user's profile Send private message View poster's gallery Reply with quote
captain slow



Member Since: 22 Jun 2011
Location: Herts
Posts: 355

United Kingdom 2014 Defender 110 Puma 2.2 CSW Corris Grey
Hi K9F

many thanks Thumbs Up 2.2 Tdci 110 XS CSW Corris Grey
Prince Harry's D3 (gone but not forgotten)
300 Tdi 110 CSW (gone but not forgotten)
Post #468056 31st Oct 2015 11:35am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
tookaphotoof



Member Since: 18 Mar 2013
Location: dordrecht
Posts: 1279

Netherlands 2013 Defender 130 Puma 2.2 HCPU Santorini Black
True Ecco. But in that case, have a look, know how to fix it and then still... let them sort it out for you.
Somehow I'm glad I am almost through my warranty period. 😊
Post #468063 31st Oct 2015 12:04pm
View user's profile Send private message View poster's gallery Reply with quote
Ecco



Member Since: 31 Oct 2015
Location: Kuala Lumpur
Posts: 279

Malaysia 2014 Defender 110 Puma 2.2 DCPU Galway Green
..thanks folks..i have located that hose and to be honest, i cant see much from the top (cracks and so on),and i do not want to touch a thing, because its under warranty..but it persist to make hissing noise soon as i press accelerator..it sounds like a entire jungle of angry pythons is squeezed under the engine hood and they are real Censored of..it will have to wait till monday then..i dont know am i going to lose warranty if I buy that steel hoses kit? I mean, if i buy steel hoses kit and then bring car to Land Rover and ask them to install that?
Post #468075 31st Oct 2015 1:17pm
View user's profile Send private message View poster's gallery Reply with quote
ericvv



Member Since: 02 Jun 2011
Location: Near the Jet d'Eau
Posts: 5816

Switzerland 2009 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black
captain slow wrote:
ericvv wrote:
Here is the perfect solution. These are for a Puma 2.4, but believe they now exist for 2.2 also.


Click image to enlarge


Hi Eric,

those look superb - can I ask where they came from? cheers


Capt. Slow, they are not Alive, but they are from German Entreq. Probably the best that exist, several on here have them, including bpman. Not easy to fit without getting bloody knuckles, unless you drive over to the Entreq workshop by lovely Lake Constanz in South Germany and let Olaf install it as I did. But be careful, if you do that, you probably will walk away with more upgrades installed, as I did. Mr. Green
I just checked Entreq website, and the version for the 2.4 is available, but the version for the 2.2 is still in the engineering/pre-production phase.
Below is a link to a thread of my visit to Entreq with details of what was all installed.
Eric
http://www.defender2.net/forum/topic37404.html?highlight=entreq You never actually own a Defender. You merely look after it for the next generation.
http://youtu.be/yVRlSsJwD0o
https://youtu.be/vmPr3oTHndg
https://www.youtube.com/watch?v=_GtzTT9Pdl0
https://www.youtube.com/watch?v=ABqKPz28e6A
https://www.youtube.com/watch?v=rLZ49Jce_n0
https://www.youtube.com/watch?v=XvAsz_ilQYU
https://www.youtube.com/watch?v=K8tMHiX9lSw
https://m.youtube.com/watch?v=dxwjPuHIV7I
https://vimeo.com/201482507
https://www.youtube.com/watch?v=ZSixqL0iyHw
Post #468111 31st Oct 2015 4:38pm
View user's profile Send private message View poster's gallery Reply with quote
K9F



Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610

United Kingdom 2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey
Eric FYI Entreq & Alive do NOT make intercoolers but outsource. The intercoolers are all made by the same Austrian company in this case and 'branded' accordingly I think you'll find. Whistle Thumbs Up If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!
Post #468221 31st Oct 2015 11:49pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 2 of 3 <123>
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums