DEFENDER2.NET - View topic - Bowden Cable to recirculator flap

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Bowden Cable to recirculator flap

Page 1 of 1

Print this entire topic ·

Coolcamper55

Member Since: 22 Apr 2010
Location: Inverclyde
Posts: 45

2007 Defender 110 Puma 2.4 XS CSW Santorini Black

Bowden Cable to recirculator flap

I am looking for some help with this.
I had problems with the flap on the blower unit sticking when I bought the car some years back. The slider control was very sticky and I pushed too hard and the peg that holds the cable broke. I returned to the garage and they replaced the cable and unit.
The problem I have is that the cable jumps off the retaining peg when I try to slide it to the left.
I can move the flap manually at the blower end and it's not stiff or difficult.
If I fit it as per the manual (climate control unit) it stays in if I hold it down but bends the inner wire rather than push straight back.

Thoughts, tips would be most appreciated.

Thanks. Tommy

110 XS TDCi

20th Aug 2015 1:57pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum